User's Manual
Table Of Contents
9.3 Basic programming functions
• Press F on the keypad to access the maintenance menu or enter the "door
open" option code.
• Select the programming function number from the list below, for example "1"
(time setting).
• Validate with "V".
At the end of an on-site programming function, after you Validate with "V" (or
Cancel with "C"), the parking terminal will ask:
CONFIRM?
YES: 1 NO: 2
or
CANCEL?
YES: 1 NO: 2
IMPORTANT:
Do not try to use other maintenance function numbers without the
consent of the technical service.
Function 1 - Setting the date and time
Enter the current date, say 9.57 a.m. on Friday September 22
nd
2000.
• The day flashes ........... enter "22" then "⇒".
• The month flashes ....... enter "09" then "⇒".
• The year flashes.......... enter "00" then "⇒".
• The time flashes.......... enter "09" then "⇒".
• The minutes flash ........ enter "57" then "V".
IMPORTANT
:
The terminal will automatically display the day of the week, Friday in this
case.
Strada Rapide - Operation manual
29