User's Manual
V2 CLESS – NOTICE D’UTILISATION - USER MANUAL v1.0
18
13.INSTALLING THE V2 CLESS
4.1 Module
Tools required: Philips head screwdriver
Time required for the intervention: 2 min
Other components to remove/Preliminaries: switch off the power to the devices in EMS mode
or with the button on the front of the CPU.
• Disconnect the antenna cable and the contactless reader cable.
• Slightly unscrew the two fastening screws with a Philips head screwdriver.
• Unscrew the two bolts holding the drive module.
Contactless reader
• Remove the faulty drive module housing.
• Mount the new drive module with SAMs (if present in the former).
• Connect the cables on the previous drive module.
• Press the power button device of the CPU.
• Perform a functional test using the "test connection map" from the menu EMS "travel card
reader.
Fixing screws
X2
Contactless
reader cable
Antenna
cable