Bulletin HY11-5715-558/UK Installation Manual Series EC106 Power Amplifier for Pressure-/Flow Valves Parker Hannifin GmbH & Co. KG Hydraulic Controls Division Gutenbergstr. 38 41564 Kaarst, Germany Tel.: +49-181 99 44 43 0 Fax: +49-2131-513-230 E-mail: infohcd@parker.com Copyright © 2002, Parker Hannifin GmbH & Co.
Power Amplifier f. Pressure-/Flow Valves Series EC106 Installation Manual Note This document and other information from Parker Hannifin GmbH, its subsidiaries, sales offices and authorized distributors provide product or system options for further investigation by users having technical expertise. Before you select or use any product or system it is important that you analyse all aspects of your application and review the information concerning the product or system in the current product catalogue.
Power Amplifier f. Pressure-/Flow Valves Series EC106 Installation Manual Electronic module for the control of proportional pressure or flow valves. The pressure-/ flow values are given by externally supplied command signals and internal ramp potentiometers. Features • • • • • • Processing and amplification of externally supplied positive commands into output signals for the control solenoid. Up to 6 independent channels for the control of up to 6 valves.
Power Amplifier f. Pressure-/Flow Valves Series EC106 Installation Manual EMC EN 50081-2 EN 55011 EN 50082-2 ENV 50140 EN 61000-4-4 ENV 50204 EN 61000-4-5 EN 61000-4-2 EN 61000-4-6 Block Diagram (2 Channel Option) IA EC106 UK.INDD RH 02.06 4 Parker Hannifin GmbH & Co.
Power Amplifier f. Pressure-/Flow Valves Series EC106 Installation Manual Block Diagram (4 Channel Option) IA EC106 UK.INDD RH 02.06 5 Parker Hannifin GmbH & Co.
Power Amplifier f. Pressure-/Flow Valves Series EC106 Installation Manual Block Diagram (6 Channel Option) IA EC106 UK.INDD RH 02.06 6 Parker Hannifin GmbH & Co.
Power Amplifier f. Pressure-/Flow Valves Series EC106 Installation Manual Connector (Elevation B) d2 Output solenoid 1 d6 Output solenoid 2 d10 Output solenoid 3 d16 Output solenoid 4 b2 b4 b6 b8 b10 b12 b14 b16 b18 b20 b22 Output solenoid 1 Input command 1 / 0...+10V Output solenoid 2 Input command 2 / 0...+10V Output solenoid 3 Input command 3 / 0...+10V Input command 4 / 0...+10V Output solenoid 4 Input command 5 / 0...+10V Output solenoid 5 Input command 6 / 0...
Power Amplifier f. Pressure-/Flow Valves Series EC106 Installation Manual Dimensions (Euro card) Installation guide to electronic modules to provision of electromagnetic compatibility Installation The module has to be mounted within a conductive, shielded enclosure. Usable is i.e. an EMC-approved control cabinet. A perfect grounding of the enclosure is mandatory (see also chapter “Grounding“). Power Supply The utilized power supply has to comply with the EMC-standards.