User's Manual

ACR-MOTIONMAX Installation Guide
2
User Information

ACR Series products are used to control electrical and mechanical
components of motion control systems. You should test your motion system
for safety under all potential conditions. Failure to do so can result in damage
to equipment and/or serious injury to personnel.
ACR series products and the information in this guide are the proprietary property of Parker Hannifin
Corporation or its licensers, and may not be copied, disclosed, or used for any purpose not expressly
authorized by the owner thereof.
Since Parker Hannifin constantly strives to improve all of its products, we reserve the right to change this
guide, and software and hardware mentioned therein, at any time without notice.
In no event will the provider of the equipment be liable for any incidental, consequential, or special
damages of any kind or nature whatsoever, including but not limited to lost profits arising from or in any
way connected with the use of the equipment or this guide.
© 2004 Parker Hannifin Corporation
All Rights Reserved
Technical Assistance
Contact your local automation technology center (ATC) or distributor.
North America and Asia
Parker Hannifin
5500 Business Park Drive
Rohnert Park, CA 94928
Telephone: [phone] or [phone]
Fax: [phone]
Email:
[e-mail]
Internet: http://www.parkermotion.com
Germany, Austria, Switzerland
Parker Hannifin
Postfach: 77607-1720
Robert-Bosch-Str. 22
D-77656 Offenburg
Telephone: [phone]
Fax: [phone]
Email:
[e-mail]
Europe (non-German speaking)
Parker Hannifin
21 Balena Close
Poole, Dorset
England BH17 7DX
Telephone: [phone]
Fax: [phone]
Email: [e-mail]
Italy
Parker Hannifin
20092 Cinisello Balsamo
Milan, Italy via Gounod, 1
Telephone: [phone]
Fax: [phone]
Email: [e-mail]
Technical Support E-mail
[e-mail]