User Manual

GAS CONNECTION

Your cooker is delivered adjusted for the kind of

gas stated on the rating plate.

If the appliance is supplied with natural gas and the

pressure for natural gas is 20mbar. The following

methods of connection to the gas supply must be

used:

Right Hand Connection (from front)

Ensure that the rubber hose is not in contact with

any part of the hatched area shown in the diagram

and that the loop of the hose when connected is

not in contact with the floor when the appliance is

in position (fig. 25).

Left Hand Connection (from front)

Ensure that the rubber hose is not in contact with

any part of the hatched area shown in the diagram

and the hose is retained in the clamp provided, it

will be necessary to fit the maximum length hose

when using this method (1200mm min) (fig. 26).

fig. 25

fig. 26