PRESSURE WASHER PHD 100 A1 PRESSURE WASHER Translation of original operation manual 6 63822_par_Hochdruckreiniger_Cover_LB6.indd 20 03.03.
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. GB / IE Translation of original operation manual 63822_par_Hochdruckreiniger_Cover_LB6.indd 21 Page 5 03.03.
A 1 2 3 4 5 6 7 8 15 14 9 13 11 10 12 B 11 1 2 13 12 10 3 10 14
C 13 12 10 11 D E 10 17 16 9 16 F G 8 18 9
GB IE Content Notes on Safety Notes on Safety .................................... 5 Explanation of symbols ..................... 5 Symbols in the manual ..................... 6 General notes on safety .................... 6 Areas of Application ............................. 8 General Description ............................. 8 Overview ........................................... 8 Functional description ....................... 8 Scope of Delivery .............................. 9 Start-up ..............
GB IE Symbols in the manual Warning symbols (the danger can be explained at the place of the exclamation mark) with information on damage and injury prevention. page 14 of the operating instructions for possible fault causes or contact our service centre. Working with the equipment Caution: to avoid accidents and injuries: Instruction symbols (the instruction can be explained at the place of the exclamation mark) with information on preventing damage. CAUTION.
GB cur within the vicinity of air inlets. Caution! To avoid damage to the equipment and any possible person injury resulting from this: • • • • • • • • • Do not work with damaged or incomplete equipment, or with equipment that has been converted without the approval of the manufacturer. Before initial operation, have a specialist check that the required electrical protection measures are in place.
GB • • • • • IE is damaged, it must be replaced by the manufacturer, a customer service agent of the same or a similarly qualified person in order to prevent hazards. Do not pull the plug from the socket by the cable. Protect the cable from heat, oil and sharp edges. Do not carry or fix the equipment by the cable. Use only extension cables that are protected from spray water and designed for outdoor use. Always fully unroll a cable drum before use. Check the cable for damage.
GB Scope of Delivery connecting the rapid-action water supply connector to the water connection with sieve insert (8). Unpack the pressure washer and verify the contents: - Pressure washer Chassis Gun High-pressure hose Jet lance High-pressure nozzle Adjustable flat-jet nozzle Cleaning agent container with nozzle Nozzle cleaning pin C Water that has passed through a backflow preventer is classified as undrinkable. A backflow preventer is available from specialist retailers.
GB IE Operation Interrupting operation • • • • Connect the equipment to the water tap. Observe the regulations for the use of a system separator. Turn on the water tap entirely. Never operate the pressure washer with a closed water tap. Dry running will damage the washer! Be prepared for the recoil force of the emitted water jet! Ensure that you are standing firmly and that you are holding the gun ( A 5) securely, otherwise you could injure yourself or other people.
GB • F To cancel the wheel fixing, push the two bolts (16) upwards. Removing the Chassis The pressure washer can also be used without the chassis (9). • • Press the release button (18) on the front locking point. Hold the chassis (9) securely in the front area and pull the pressure washer upwards. At the same time, tilt the pressure washer slightly to the rear. To reinstate, insert the device into the rear area of the chassis (9).
GB IE Waste Disposal and Environmental Protection • Be environmentally friendly. Return the tool, accessories and packaging to a recycling centre when you have finished with them. Electric appliances should not be disposed of in the domestic garbage. Hand the tool in at a recycling centre. The plastics and metal parts can be separated and recycled. Ask your Service Center about this. We can carry out a waste disposal of your device free of charge.
GB IE Technical data Pressure Washer ................PHD 100 A1 Mains connection.................230V~, 50 Hz Power consumption ...................... 1450 W Mains cable .........................................5 m Weight (incl. all parts) ...................... 6,0 kg Safety class ......................................... II Degree of protection .......................... IPX5 Inflow temperature t, max. .................40°C Inflow pressure p, max. ............... 0,8 MPa Operating pressure p ...........
GB IE Trouble shooting Problem Washer is not operating Possible cause ON / OFF switch (5) is turned off Check ON / OFF switch Damaged power supply cable Check power supply cable (7) for damage. If necessary have the power supply cable (7) replaced by a qualified electrician. Mains fault Check the electrical system for conformity with the data on the rating plate.
GB IE EU declaration of conformity We hereby confirm that the Pressure Washer Design Series PHD 100 A1 Serial number 201104000001 - 201104125000 conforms with the following applicable relevant version of the EU guidelines: 2004/108/EG • 2000/14/EG • 2006/42/EG In order to guarantee consistency, the following harmonised standards as well as national standards and stipulations have been applied: EN 60335-1/A13:2008 • EN 60335-2-79:2009 • EN 62233:2008 • EN 55014-1:2006 EN 55014-2:1997+A1:2001+A2:2008 • EN
GB IE Exploded Drawing informative 16
GB IE Grizzly Service-Center DES UK Ltd. Unit B7 Oxford Street Industrial Park Vulcan Road Bilston, West Midlands WV14 7LF Tel: 0870 7876177 Tel from Ireland: 0044 870 787 6177 Fax: 0870 7876168 Fax from Ireland: 0044 870 787 6168 E-mail: grizzly@deslimited.
IAN 63822 Grizzly Gartengeräte GmbH & Co. KG Am Gewerbepark 2 D-64823 Groß-Umstadt Last Information Update: 03 / 2011 Ident.-No.: 75041413032011-6 63822_par_Hochdruckreiniger_Cover_LB6.indd 19 6 03.03.
