Operation Manual

12
IE
GB
Trouble shooting
Problem Possiblecause Remedy
Washer is not
operating
ON / OFF switch is turned
off
Check ON / OFF switch
Damaged power supply
cable
Check power supply cable for da-
mage. If necessary have the power
supply cable replaced by a qualied
electrician.
Mains fault
Check the electrical system for confor-
mity with the data on the rating plate.
Washer does
not generate
any pressure
Air trapped in the pressure
washer
Turn on the washer with high-pressu-
re hose until bubble-free water ows
out of the high-pressure connection.
Drop in the water mains
pressure
Check the water mains.
Severe pressu-
re uctuations
High-pressure nozzle is dirty
Rinse the high-pressure nozzle with
water. If necessary clean the nozzle
hole with a needle.