Orbital Sander Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. XQ600 Kompernaß GmbH Burgstraße 21 44867 Bochum (Germany) Last Information Update: 11 / 2007 · Ident.-No.
10 9 1 8 2 7 3 6 5 A B C D 4 11
Table of Content Introduction Intended utilisation...................................................................................................... Features and Fittings.................................................................................................... Items supplied.............................................................................................................. Technical data................................................................................................
Introduction The following icons / symbols are used in this instruction manual: Read instruction manual! Safety class II Observe caution and safety notes! Proper procedure and handling. Caution – electric shock! Dangerous electric current – danger to life! Wear hearing protection, dust protection mask, protective glasses and protective gloves. Explosive material! Keep children and other unauthorised personnel at a safe distance when using electrical tools.
Introduction / General safety advice 1 Operating manual 1 Booklet “Warranty and Service” Q XQ 600 KH 3168 230 V ~ 50 Hz · 600 W 2.500-8.000 min-1 Schwingzahl: 5.000-16.000 min-1 Date of manufacture: 02-2008 Technical data Rated voltage: 230 V ~ 50 Hz Rated power: 600 W Nominal oscillations: n0 5.000 - 16.000 min-1 Nominal revolutions: n0 2.500 - 8.
General safety advice b) A void touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an increased risk of electric shock if your body is earthed. c) Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket.
General safety advice d) L ook after the device carefully. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. e) Keep cutting tools clean and sharp.
General safety advice / Before use / Commissioning Q Understood everything? J You may begin to work with the appliance when you have familiarised yourself with the instructions, functions and handling of the appliance. The safest work is possible by heeding all information and instructions of the manufacturer.
Commissioning To switch off intermittent operation mode: j Release the On / Off switch 2 . Switching on for sustained operation: j Press the On / Off switch 2 and, at the same time, secure it with the locking button 3 . Switching off after sustained operation: j Press the On / Off switch 2 and then release it. Rotation preselection: j Select the desired rotation with the adjusting wheel rotation speed selector 5 .
Commissioning / Maintenance and Cleaning / Disposal / Information Q Advice about ways of working when sanding Q The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a local recycling centre. Note: Apply light pressure only! j Move the appliance parallel, in extensive circles or alternatively to and across. j Clean the sanding pad occasionally with the vacuum cleaner. j Never sand different materials with the same sanding pad (e.g. wood then metal).
Information Q Declaration of conformity / Manufacturer We, Kompernaß GmbH, Burgstr. 21, 44867 Bochum, Germany, hereby declare that this product conforms to the following EU Directives: Machinery Directive (98 / 37 / EC) EC Low-Voltage Directive (2006 / 95 / EC) Electromagnetic Compatibility (2004 / 108 / EC) Product designation: Parkside Rotary Sander XQ 600 Bochum, 30.11.2007 Hans Kompernaß - Managing Director - We reserve the right to make technical modifications in the course of product development.
14
