User's Manual

Unnecto ™ PRIMO User Manual
Model:U-140-2
4
scratched. Therefore, take special care when holding or inserting it and
keep it away from children.
2.1 Charging the battery
The battery is not fully charged when first unpacked. It takes three
charging-discharging cycles for the battery to reach its peak performance.
Charge a battery according to the following steps:
1. Connect the charger to the connection jack of the phone in the proper
direction, and connect the charger to a main socket.
2. The phone displays "Charger Connected!" and starts charging after
properly connected. The battery icon dynamically displays the
charging process. In switch-off state, the phone dynamically displays
the charging process.
3. When the battery is fully charged, the charging process stops
automatically, and the battery icon indicates full grid on the screen.
After the battery is fully charged, remove the charger from the phone
and socket as soon as possible.
3. Basic Functions
3.1 Power on and off
Press and hold at top of power key to turn on/off the phone.
3.2 Make a call
Enter the phone number including the area code. Press Call key to make a
call.
3.3 Make an extension call
When making an extension call, press “*” key several times to get “P”
that is a prefix of extension numbers. It will dial automatically after
several seconds since you dialed the telephone number.