Manual

TTAB •
ORHT •
VE
L
E
•
)R
( ELIA
•
)
L
( ELIA
•
D
DU
R
•
1X
U
A
•
T
T
AB •
ORHT •
VE
LE
•
)
R( ELIA
•
)L( ELIA •
DD
UR
•
1XUA
•
Installing Landing Gear
1. Slide landing gear into allotted space on fuselage.
2.
Fit should be snug, so it will not easily pull out.
Attaching the Wing
1. Locate the wing set. Note that the servos are located
in the bottom of the wing.
2.
Select a wing half and slide in fuse, making sure
that
you slide aileron servo lead in first (in allotted
hole
in side of fuse.) Pull aileron lead carefully
th
rough fuse in order to allow wing tab and spar to
go
into their allotted holes. Do the same with the
other
wing half.
3.
Carefully slide wing halves toward each other until
the
wing tabs overlap.
4.
Match up the holes on each tab and secure with
included
screw.
5.
Plug in the aileron connectors into Rx. Left aileron
should
plug into allotted space of receiver (directly
below
elevator). Right aileron lead should plug into
second
space of Rx allotted for aileron.
Always
check ailerons prior to flight to make sure
they
are not reversed!
Wing TabWing Tab
Step 3
Step 4
4