User guide

If it becomes necessary to return a Parr 1281

Calorimeter to the factory, the calorimeter

must be carefully packed to prevent shipping

damage. For best protection, Parr will furnish

a heavy-duty shipping carton and a foamed

plastic “trap” (spacer) which will align and

hold the calorimeter firmly in place within the

carton. The shipper must then prepare and

pack the calorimeter as described below.

1. Shut off the power and disconnect the

power cord. Shut off the oxygen and

nitrogen tanks. Vent the rinse tank and

disconnect all tubing and cables.

2. Drain the calorimeter and replace the

drain cap.

3. Close the bomb and tighten the bomb

head firmly.

4. Close the calorimeter cover and tape it

down with several strips of masking

tape.

5. Place the square plastic trap in the

bottom of the carton and lower the

calorimeter into place in the carton,

aligned on the bottom trap.

6. Place the matching trap on the top of

the calorimeter, as shown.

Instructions for Packing and Shipping

a Parr 1281 Calorimeter

No. 329M

Drain

PAGE 1
No. 329M Instructions for Packing and Shipping a Parr 1281 Calorimeter If it becomes necessary to return a Parr 1281 Calorimeter to the factory, the calorimeter must be carefully packed to prevent shipping damage. For best protection, Parr will furnish a heavy-duty shipping carton and a foamed plastic “trap” (spacer) which will align and hold the calorimeter firmly in place within the carton. The shipper must then prepare and pack the calorimeter as described below. 1.
PAGE 2
7. Close and tape the shipping carton, making sure that the arrows on the carton point upward to require that it be kept in an upright position. 8. Attach readable shipping address and, if shipping to the factory, be sure to show the RMA No. (Returned Material Authorization Number) provided by Parr. 9.