Instructions / Assembly

WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6225
Installation & Operating Instructions for the
Parrotuncle Owner's Installation ,Manual
washers
Outlet box
3
Screws
4
x2
x2
Remove the 3 screws shown as above figure
before taking down the top housing .
washer
blade
take from
hardware pack
screw
center band tilted hole
blade bracket
center band
Time Saver:Washers for blade screws can be set on each blade
screw prior to installing blades.
Locate 12 pcs blade attchment screws and washers in hardware
pack. Slide blade through center band and align holes. Insert 3pcs
blade screws and washers with fingers. Tighten securely with a
phillips screwdriver. Repeat for the remaining blades.
Note: The reverse switch must be site on the top housing.
Fan Blade Assembly
Reattach to plate to motor yoke and install it by aligning the key slot
holes on the motor yoke us- ing previously removed screws.