User's Manual

This simplified guide of the Parrot CK3100 LCD gives you
the main instructions to easily use this product. For more
information, refer to the user guide available on our website
www.parrot.com.
The availability of some functionality only depends
on your mobile phone.
► Refer to our website www.parrot.com, in the
Compatibility section, for further information.
Installing the Parrot CK3100 LCD
The Parrot CK3100 LCD system is fitted with 4 outputs:
Audio, Power, LCD screen, Microphone. It is recommended
to install all the cables before fixing the electronic box.
To avoid wrong connections, each cable supplied
has a different connector.
Installing audio connectors
The Mute cable supplied is equipped with (black) ISO
connectors and with a “line out” output.
Car radio with “line in” input:
► Refer to the diagram on p.6 for more information.
1. Wire the line output (green and brown wires) to the
auxiliary input of the car radio.
2. Connect the mute cable (the yellow one) to the mute
output of your car radio.
Car radio with ISO connectors:
► Refer to the diagram on p.7 for more information.
1. Disconnect the ISO connectors of the car radio.
2. Wire the male connectors of the mute and power cables
to the car radio.
3. Wire the audio and power connectors of the car to the
female connectors of the Parrot CK3100 LCD wiring.
If the car radio is equipped with a Mute input, connect
the yellow wire of the audio cable to one of the “Mute in
1”, “Mute in 2” or “Mute in 3” inputs.
► To know the precise position of your car radio Mute input,
refer to your car radio user guide.
Car radio without ISO connectors:
You have to obtain an ISO cable to adapt your car radio to
the ISO connectors of the Parrot CK3100 LCD. Consult our
website www.parrot.com for more information.
English
9