User's Manual
Table Of Contents
- 1 Product overview
- 2 Software specifications
- 3 Electrical specifications
- 3.1 Hardware architecture
- 3.2 Pin-out
- 3.3 Absolute Maximum ratings
- 3.4 Power consumption (T =25 C, 1V8 provided by LDO MPS2002)
- 3.5 Electrical characteristics
- 3.6 Reset and supply sequence diagram
- 3.7 Flash update sequence diagram
- 3.8 Power Off Sequence diagram
- 4 Mechanical specifications
- 5 Available tools
- 6 Approval / Certifications
- 7 Use Cases
- A. Bluetooth HFP & A2DP/AVRCP use cases overview:
- a. Head Unit paired with Mobile phone
- b. Head Unit connected to Mobile phone and headset device
- c. Head Unit paired with two Mobile phones
- d. Audio Streaming and Handsfree working together
- e. Head Unit paired with Mobile phone and Music Player with BT integrated or Bluetooth dongle:
- f. Head Unit paired with a stereo Headphone
- g. Head Unit paired with Mobile phone: Data transfer
- B. Head unit BT/UART software update
- A. Bluetooth HFP & A2DP/AVRCP use cases overview:
DATASHEET FC6000 Confidential Information 44/52
b. Head Unit connected to Mobile phone and headset device
SCO link Audio 8 kHz Mono
Car announcements (Navigation,etc…)
and Communication privacy
Hands Free Audio Gateway
Hands Free Device
Hand Free Audio Gateway
Mobile Phone
Hands Free Telephony
Phonebook synchro
Telephony
Phonebook
Audio unit
FC6000
SCO forwarding feature (2 SCO)
The module is connected to a Headset and a phone at the same time. When requested by
the user, the Module is able to forward audio from the phone to the Headset. Therefore, the
communication is switched for privacy purpose. Two SCO channels are opened from the
Module.
Description of the behavior:
- Incoming call:
o Pick up from the HMI will pick up the call and establish one (e)SCO with the
phone and one with the Headset.
o Hang up from the HMI will hang up the call and release the 2nd SCO.
- Outgoing call:
o Dialing from the HMI will place the call on the phone, and once the remote
party has picked up, one (e)SCO is established with the phone and one with
the Headset.
o Hang up from the HMI will hang up the call and release the 2nd SCO.
A command is proposed on Parrot Module to handle the establishment of dual SCO,
depending on user need.