User's Manual
Table Of Contents
- 1 Product overview
- 2 Software specifications
- 3 Electrical specifications
- 3.1 Hardware architecture
- 3.2 Pin-out
- 3.3 Absolute Maximum ratings
- 3.4 Power consumption (T =25 C, 1V8 provided by LDO MPS2002)
- 3.5 Electrical characteristics
- 3.6 Reset and supply sequence diagram
- 3.7 Flash update sequence diagram
- 3.8 Power Off Sequence diagram
- 4 Mechanical specifications
- 5 Available tools
- 6 Approval / Certifications
- 7 Use Cases
- A. Bluetooth HFP & A2DP/AVRCP use cases overview:
- a. Head Unit paired with Mobile phone
- b. Head Unit connected to Mobile phone and headset device
- c. Head Unit paired with two Mobile phones
- d. Audio Streaming and Handsfree working together
- e. Head Unit paired with Mobile phone and Music Player with BT integrated or Bluetooth dongle:
- f. Head Unit paired with a stereo Headphone
- g. Head Unit paired with Mobile phone: Data transfer
- B. Head unit BT/UART software update
- A. Bluetooth HFP & A2DP/AVRCP use cases overview:
DATASHEET FC6000 Confidential Information 47/52
o There are a lot of other features, but the phone/Bluetooth Music Players do
not implement these extended commands.
AVRCP CT 1.0 (Category 1 – Parrot Module):
- At least one command of the specification should be supported.
- Parrot has decided to implement the full Player Control (events send to the phone):
o Play, Pause, Stop, Next, Previous, Pause, FF, FW
AVRCP TG 1.3 (Category 1 – Music Players):
- Mandatory commands:
o Same perimeter as AVRCP TG 1.0.
- Optional Features:
o If the phone supports the Bluetooth SIG Vendor Unique Feature, only Title of
the Media is mandatory for Metadata. And Playback status and change of
current track shall be supported in this case.
o Other important features for Metadata support are Name of the Artist, Name
of the Album, Genre...
AVRCP CT 1.3 (Category 2 – Parrot Module):
- Mandatory commands:
o Same perimeter as AVRCP CT 1.0.
- Parrot optional features implemented:
o Referring to the specification, all “List of Media Attributes” are supported to be
displayed on the car radio HMI.
AVRCP TG 1.4 (Category 1 – Music Players)
4
:
- Mandatory commands:
o Same perimeter as AVRCP TG 1.0.
- Optional Features:
o If the phone supports the Bluetooth SIG Vendor Unique Feature, only Title of
the Media is mandatory for Metadata. And Playback status and change of
current track shall be supported in this case.
o Other important features for Metadata support are Name of the Artist, Name
of the Album, Genre...
AVRCP CT 1.4 (Category 2 – Parrot Module)
5
:
- Mandatory commands:
o Same perimeter as AVRCP CT 1.0.
- Parrot optional features implemented:
o Referring to the specification, all “List of Media Attributes” are supported to be
displayed on the car radio HMI.
According to the AVRCP version supported by the phone, the HMI should be implemented
with information provided by the Module: Player status / Metadata for the current played
song.
As member of AV Working Group, Parrot is involved with the development of those
specifications.
4
For NAND version Only
5
For NAND version Only