Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Navigon 5 Qtek S100
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Features • GPS and Handsfree connection at the same time. • Voice navigation instructions through PDA headspeakers. • Automatic switch between GPS and phone applications for outgoing calls.
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 SetUp Procedures • Setup Procedure. • Navigon 5 Setup Procedure.
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 1 - HandsFree Procedure Parrot 3400 LS GPS’ start screen Go to the SETTINGS menu
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 1 - HandsFree Procedure In the car kit, review the PAIRED DEVICES \ select OTHER PHONES menu. The car kit will display a PIN code.
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 1 - HandsFree Procedure PDA’s today screen Consult the START menu and please choose the SETTINGS option Tap on the SYSTEM tab
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 1 - HandsFree Procedure Select the BLUETOOTH SETTINGS icon Select the OUTBOUND port Select a GPS device, please tap on OK
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 1 - HandsFree Procedure Bluetooth is activate, please tap on the DEVICES tab You have to select a new Bluetooth device: please tap on NEW The phone is searching for Bluetooth devices in range
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 1 - HandsFree Procedure Please select Parrot 3400 LS Enter the PIN code displayed by the car kit
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 1 - HandsFree Procedure The pairing is completed: tap on DONE Please accept to define the Parrot 3400LS as a HandsFree device
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 1 - HandsFree Procedure HandsFree connection is established
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 2 - GPS Procedure Navigate to the car kit GPS menu Consult the ACTIVATE / DEACTIVATE menu of the Parrot 3400 LS GPS Make sure the GPS feature is activated
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 2 - GPS Procedure Press on the car kit’s red button.
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 2 – NAVIGON Setup Procedure Please start the MOBILE NAVIGATOR 5 software NAVIGON’s start screen Select the SETTINGS icon
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 2 - NAVIGON Setup Procedure Select the GPS command Please select MANUAL SETTINGS Please set the receiver model as OTHER GPS RECEIVER
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 2 - NAVIGON Setup Procedure Please set the Interface with the COM5 Please set the Baud option Select the NAVIGATION icon at 9600 and please validate
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 2 - NAVIGON Setup Procedure Select ADDRESS to define a destination Set your address Select START NAVIGATION
Parrot 3400 LS GPS with Qtek S100 and Navigon 5 Step 2 - NAVIGON Setup Procedure Navigation with Navigon 5
