Parrot CK3300 with Qtek 8100 and Navigon 5 Tested with ROM operator 2.0.32.
Parrot CK3300 with Qtek 8100 and Navigon 5 Features • GPS and Handsfree connection at the same time. • Voice navigation instructions through PDA headspeakers. • Automatic switch between GPS and phone applications.
Parrot CK3300 with Qtek 8100 and Navigon 5 SetUp Procedures • Setup Procedure. • Navigon Setup Procedure.
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 1 - Setup Procedure CK3300’s start screen From the Smartphone’s Today screen, please consult the START menu
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 1 - Setup Procedure In the START menu, please select the ADVANCED CONFIG. file.
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 1 - Setup Procedure Select the BT SERIALPORTSETUP icon Check the OUTBOUND COM PORT 7 and please press on DONE
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 1 - Setup Procedure You will select a GPS device, please press on OK Please make sure BLUETOOTH is ON Press on MENU and select the DEVICES command
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 1 - Setup Procedure You will select a new Bluetooth device Please press on MENU and then select NEW The phone is searching for Bluetooth devices in range
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 1 - Setup Procedure Please select Parrot CK3300 Please enter 1234 as PASSKEY and select DONE
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 1 - Setup Procedure The pairing is completed: press on DONE Please accept to define the CK3300 as a HandsFree device
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 1 - Setup Procedure HandsFree connexion is done
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 1 - Setup Procedure Navigate to the Parrot CK3300 GPS menu Then consult the ACTIVATE / DEACTIVATE menu of the CK3300
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 1 - Setup Procedure Activate the GPS function of the kit CK3300’s GPS function is now activated
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 2 – NAVIGON Setup Procedure Please start the MOBILE NAVIGATOR software NAVIGON’s start screen Select the SETTINGS icon
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 2 - NAVIGON Setup Procedure Select the GPS command Please select MANUAL SETTINGS Please set the receiver model as OTHER GPS RECEIVER
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 2 - NAVIGON Setup Procedure Please set the Interface with the COM7 Please set the Baud option at 9600 Select the NAVIGATION icon
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 2 - NAVIGON Setup Procedure Select ADDRESS to define a destination Set your address Select START NAVIGATION
Parrot CK3300 with Qtek 8100 and Navigon 5 Step 2 - NAVIGON Setup Procedure Your GPS system is set up
