Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Teste with ROM : 040 WWE ETEN Glofish X800 with TomTom Navigator 6 Parrot 3400 LS-GPS
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 SETUP PROCEDURES • • • • Features I/ 3400 LS-GPS Pairing Procedure II/ GPS Connection III/ TomTom Navigator 6 Setup Procedure IV/ Plan a Route
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Features • • • • • • Two Bluetooth connections at the same time : GPS and Handsfree.
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step I 3400 LS-GPS Pairing Procedure for Hansfree Connexion
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure Parrot 3400 LS-GPS “Idle Mode” with Valid GPS signal Please go into the menu SETTINGS” of the carkit
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure Then, go into the menu “PAIR WITH PHONE \ OTHERS PHONES”. The carkit will display a random PIN code.
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure From the Smartphone Idle screen, please select the “START” menu.
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure Select the “BLUETOOTH” icon Please make sure that the Bluetooth is ON and then tap on the “DEVICES” tab
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure Select the “Add NEW DEVICE …” command ETEN Glofish X800 searches for Bluetooth devices Select your Parrot 3400 LS-GPS
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure Position your Parrot into the mode “Settings / Pair a phone / Other phones” Enter the “PIN CODE” displayed by the car kit Activate the HandsFree and Serial Port services.
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure On the “COM PORTS” tab, please select the “NEW OUTGOING PORT” command Select your Parrot 3400 LS-GPS among the diverse devices found.
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure Select the “COMx OUTGOING PORT” (preferentially COM6 or COM7 if possible) An Outgoing COM port has been created
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step II Pairing Procedure for GPS Connexion on the 3400 LS-GPS side
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step II – GPS Connection HandsFree connection is established. Now, let us operate the GPS connection.
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step II – GPS Connection Navigate to the Parrot 3400 LS-GPS menu (the fourth one from the idle mode) Go into the “ACTIVATE / DEACTIVATE” menu of the Parrot 3400 LS-GPS Make sure the GPS feature is “Activated”
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step II – GPS Connection Press the carkit’s RED BUTTON for at least three seconds.
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step III Pairing Procedure for GPS Connexion on the phone side
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step III – TomTom Navigator 6 Setup Procedure Please start your “TomTom Navigator 6” software in the menu “Programs” “TomTom Navigator 6” start screen without GPS signal: you need to configure GPS reception – please tap on the screen
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step III – TomTom Navigator 6 Setup Procedure Tap on “Change Preference” Select the “GPS Status” icon Choose the “Configure” option and validate
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step III – TomTom Navigator 6 Setup Procedure Please select “Other Bluetooth receiver” – then press on “continue” Select the port you have just defined as the GPS channel beforehand (“COM0” for our example) Your Parrot 3400 LS-GPS is now defined as the source of GPS signal for TomTom
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step IV Use the GPS Connexion to navigate
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step IV – Plan a route On the HOME screen, tap on the “Navigate to” icon You have different options available to define your destination. Option #1: Choose “Address” and select “City Center” to define your destination the most simple way.
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step IV – Plan a route Option #2: Choose “Advanced Planning”, meaning you need to define depart and destination points Option #2: Choose “Street and house number” for each of theses points Option #2: enter the precise address.
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step IV – Plan a route The TomTom software calculates the journey to the destination you entered Tap on Details to simulate your itinerary, then “Display a demo of the itinerary”, then select the speed of demo (200%) The simulation is launched
Parrot 3400 LS-GPS with ETEN Glofish X800 and TomTom Navigator 6 Step IV – Plan a route Navigation with “TomTom Navigator 6”