Jumping Race Drone JETT TUK TUK MAX User Guide
Table Of Contents Before starting .......................................................................................................................................................4 Charging ...........................................................................................................................................................................................................4 the battery Switching ........................................................................................
Safety ...........................................................................................................................................................................................................21 precautions and maintenance Warning ...........................................................................................................................................................................................................21 regarding the invasion of privacy Battery ...............
Before starting Charging the battery 1. Insert the battery into the appropriate compartment (pictures A and B). 2. Connect the MiniDrone (pictures C and D): To a 2.4 A minimum charger (not provided). The charging time is approximately 25 minutes. To your computer using the USB cable (provided). The charging time is approximately 1 hour and 30 minutes. > The LED located next to the On/off button turns red while charging. Once the MiniDrone is fully charged, the LED turns green. To remove the battery: 1.
In order to ensure effective maintenance of the battery on the MiniDrone never leave the battery installed in the compartment. Switching the Parrot Jumping Race Drone on and off Insert the battery into the battery compartment or press the button to switch the MiniDrone on. Wait until the MiniDrone indicates that it is ready to be used and its LED eyes turn green. Press the button to switch the MiniDrone off. The LED eyes switch off.
Piloting 1. Start the FreeFlight3 application. 2. Press FREE RIDE to pilot the MiniDrone. Press Voice transmission to pilot the MiniDrone in Talkie Walkie mode. For further information, see Talking through the MiniDrone. > The piloting screen appears. At any time you can press < to return to the main menu.
5 Walkie Talkie 13 Speed needle (Voice transmission mode only) 6 Video recording 14 Right joystick 7 Photo 15 Plugged / unplugged phone headset 8 High jump 16 Battery level Wheels position Before you start slelect the piloting mode for the MiniDrone by bringing the wheels together you are making the MiniDrone more responsive by separating the wheels you are improving the MiniDrone stability. MiniDrone's positions Press the on the key to switch to Jumper or Kicker position.
Rolling Use the left-hand joystick to pilot the MiniDrone forwards or backwards. Hold the left-hand joystick and tilt the smartphone to the left or right to direct the MiniDrone to the left or right. On the screen drag one finger from the center of the joystick towards or in order to perform a quarter turn to the left or right. Drag one finger from the center of the joystick towards in order to perform a half turn via the left or right.
Kicking Set the MiniDrone to Kicker position to push an object away. Before pushing an object away the spring of the MiniDrone needs to be compressed. This compression may be performed just before kicking in which case a delay of several seconds is necessary before executing. You also have the option of anticipating the kick by dragging the key to the left to compress the spring, while continuing to use the MiniDrone.
Press to interrupt acrobatics in progress. To launch the last selected pre-programmed acrobatic, drag one finger from the center to the top part of the left joystick. To reach the maximum speed accelerate until the speed needle reaches its highest point then activate Boost ( ). Battery The icon indicates the battery charge level of the MiniDrone. The battery life of the MiniDrone is around 20 mins. The number of jumps performed can have a considerable impact on the battery life of the MiniDrone.
Photos Press the key to take a photo. The photos are automatically saved to internal memory of the MiniDrone. When the memory is full an alert message appears. You will no longer be able to take a photo. Videos The video recording starts automatically when you press Start. The icon flashes while the video is recording. Press to stop the video record. The videos are automatically saved to internal memory of the MiniDrone. When the memory is full an alert message appears.
Settings Press to get to the MiniDrone settings menu. At any time you can tap on to reset the device to its factory settings. This will also delete road plans, photos and videos stored into the MiniDrone memory. You can also reset to factory settings without using FreeFlight3. To do so, turn on the MiniDrone then hold down the on/off button for 12 seconds. Media Use the Principal volume option to set the volume of your MiniDrone.
underscores ("_"). It must not exceed 32 characters in length. Before starting check your smartphone's instruction manual (or the technical specifications) to see whether it supports connection to the 5GHz Wi-Fi band. If it doesn't use the 2.4GHz Wi-Fi band only. The 5GHz Wi-Fi band generally ensures the best performance of the MiniDrone because the 2.4GHz Wi-Fi band is more congested. The Country list enables you to choose the country where you use the MiniDrone.
the option of manually switching the network generated by the MiniDrone to the 2.4GHz Wi-Fi band without using the application. To do this, press down for 3 seconds on the button. Information The screen General information enables you to display: the version number of the FreeFlight3 application installed on your smartphone, the version number of the firmware installed on your MiniDrone, the hardware version of your MiniDrone.
Road plan The Road plan function enables you to program and save a ride for the MiniDrone. To access this function press Road plan. At any time you can press < to return to the main menu. The road plan is saved automatically. Defining a road plan You have the option of creating your road plans without being connected to a MiniDrone. No. Description 1 List of actions available for a road plan Drag your finger to the right or left to scroll through the available actions.
zoom in or pinch to zoom out. 3 Order of events within your road plan 4 Trajectory of the MiniDrone Press on an action and drag it into the right-hand column to add it to the road plan. The corresponding trajectory is displayed on the road plan. To delete an action slide the action from the right column to the left of the screen.
Changing the position See the Positions section for further information. Performing a jump, kicking an object or loading the spring Modifying the color and luminosity of the eyes Select the eyes and define the luminosity of the selected eye. To switch the eyes off, insert an action, defining the luminosity as 0%. Performing preprogrammed acrobatics Select the acrobatics type. Press to start the ride. Managing road plans As you define a road plan it is automatically saved.
Drone Academy An internet connection is necessary to use the Drone Academy. To launch the Drone Academy: 1. Launch the FreeFlight3 application. 2. Press Drone Academy. A profile is necessary to access the Drone Academy. To create a profile: 1. Press Sign up now. 2. Type a user name, a password and an e-mail address. 3. Press Register your profile.
5 Modifying and disconnecting your profile 6 Sending a Drone Academy invitation To modify or delete your profile: 1. Press the Profile tab. 2. Press 3. Press Logout or Edit. 4. If you edit your profile slide the screens towards left to complete your profile. To register a MiniDrone press My drones. The first time you connect the MiniDrone to your smartphone, a pop-up ask you to register your MiniDrone in the Drone Academy. To consult the shared flights: 1. Press Map. 2.
Updating Press Check for Updates to verify the availability of an update for the MiniDrone. There are 2 ways to update the MiniDrone : via the application (recommended). via USB, by downloading the update file from our website. This method requires a computer. See the update procedure for the MiniDrone for further information.
General information Safety precautions and maintenance Accessories and spare parts are available from your Parrot retailer or from our website store.parrot.com. The MiniDrone is not suitable for children under 14 years of age. To reduce the risk of damage, we recommend that you bring the MiniDrone down in increments of approximately 80cm. There are some public places (stations, airports etc.) and roads where you may not be permitted to use your MiniDrone.
fireproof location. Always make sure that the charger output voltage corresponds to the battery voltage. Always keep out of the reach of children. Incorrect use of the battery can cause fires, explosions or other damage. The battery terminals should not be allowed to short-circuit. The product should be connected only to class II appliances which display the symbol. Warranty For the warranty conditions please refer to the retailer’s General Conditions of Sale where you purchased your MiniDrone.
301893 (V1.7.1), EN71-1, EN71-2, EN62115, EN62321 according to the provisions of directive R&TTE 1999/5/CE, the general safety of products directive 2001/95/CE and the directive RoHS 2011/65/CE. The declaration of conformity is available at the following address: www.parrot.com/fr/ce/?jumping-race-drone Registered trademarks Parrot, Parrot MiniDrones and the Parrot logo are registered trademarks of PARROT SA. iPhone and iPad are trademark of Apple Inc, registered in the USA and in other countries.