Owner's Manual
Table Of Contents
10
amplifier). Several
set-ups
are therefore possible
depending on the
type
of
car stereo and your vehicle.
• The
mute
function is used
to
cut
the sound
of
your
car
stereo
to
enable a phone call. The choice
of
the
mute-in
jack
depends on
your
car
stereo's configuration.
• Make sure
the
cables are not pinched at
the
end
of
the
installation process.
Installing the electronic box
Avoid installing the electronic box:
- near heating
or
air-conditioning system;
- on a
spot
directly exposed
to
sunlight;
- behind metal walls.
Car
stereo with an ISO connector
~
Refer to the installation diagram
pA.
1. Connect
the
male connectors
of
the
hands-free kit
to
the
car
stereo.
2.
Join
the
vehicle's audio and
power
supply cables
to
the
female connectors
of
the
Parrot MKi9100.
3. On
the
installation cable, connect
the
free yellow wire
to
one
of
the
audio system's corresponding mute-in jacks if
available (mute
in
1, mute
in
2
or
mute
in
3).
Car
stereo with line-in
~
Refer to the installation diagram p.5.
• Use
this
type
of
connection
by
wiring the line-out
(brown & white wire
or
red & black wire)
to
your
car
stereo's line-in.
• Using
the
two
pairs
of
line-out will enable you
to
take
advantage
of
the
streaming audio function
in
stereo
over your vehicle's speakers.
• On
the
installation cable, connect
the
free yellow
wire
to
the
corresponding audio system's mute-input if available
(mute in
1,
mute
in 2
or
mute
in
3).
Car
stereo without ISO connectors
To
simplify the wiring procedure, you will need
to
purchase
an
ISO adapter cable. Refer
to
the range
of
ISO adapters on
our
website: www.parrot.com.
Installing the kit's power cable
In order to check the wiring, connect the screen
before placing
it
on the dashboard.
~
Refer to the Checking the wiring section
for
more information.