User Guide

User's guide
14
Pers. Dic :
The key words are pre-recorded in the car kit for French
language only (the language is determined by the language
used by the menus of the phone).
You need to activate this option if you want to use your own
recorded keywords.
Click «Yes», and «Clear memory?» is displayed.
Confirm by pressing «Yes» and «Memory erasing in progress.
Please wait!» - is announced. To cancel, press «No».
It is possible to erase the memory and reset the system
without using the Parrot menu. To do this, hold the red and the
green buttons together.
If the option «Multi-Tel» is activated for this phone, the
CK3000 EVOLUTION will accept incoming calls from the
other phones if they were previously paired with the
CK3000
EVOLUTION.
Warning :
The «Multi-Tel» function is now compatible with the T68i,
T610, T616, T618, Z600 and Z608 (with specific software
versions). This function is available when the «Powersave»
mode is activated in the phone, i.e. «Headset» profile mode.
Once this mode activated, the CK3000 EVOLUTION has
to identify every phone in this new mode. It should be
necessary to connect separately each phone with the
CK3000
EVOLUTION and restarting it between each identification.
N° Phone :
Keywords for calling V-Cards («Home», «Work» and
«Cellular») can be accessed by clicking «Yes», Tel. N°. The
voice recognition learning sequence is exactly the same as the
one for the names.
Key words :
Key words are «Phone» and «Hang Up». You need to record
your own key words for use with «Wordspotting» option.
Wordspotting :
If activated, enables use of keywords to make a call and to
hang up.
 Activated: use keywords or buttons
 Deactivated: use buttons only
Voice recognition
Erasing the memory