Datasheet

Parrot MKi9000 – User guide 6
Car stereo with
line-in jacks
• Use this type of connection by wiring a line-out jack (brown &
white
wire or red & black wire) to your car stereo’s line-in jack.
• Using the two pairs of line-out jacks will enable you to take advantage
of the streaming audio function in stereo over your vehicle’s speakers.
• On the installation cable, connect the free yellow wire to one of the
audio system’s corresponding mute-in jacks if available (mute in 1,
mute in 2 or mute in 3).
Car stereo
without ISO
connectors
To simplify the wiring procedure, you will need to purchase an ISO
adapter cable. Refer to the range of ISO adapters on our website:
www.parrot.com.
Installing the
kit’s power cable
• Refer to your car stereo’s wiring diagram.
• The red wire of the kit’s cable must correspond to the constant +12V
supply, the orange wire to the ignition +12V and the black wire to
ground.
• Check that the orange wire is not connected to the constant +12V
supply, as you could run down the vehicle’s battery.