PLEASE UPDATE YOUR SENSOR TO THE LATEST VERSION BEFORE USE. Check on: www.parrot.com/uk/sup.
rr BLUEGRASS FIELDS USER GUIDE GUIDE UTILISATEUR GEBRAUCHSANLEITUNG GUIDA PER L'UTENTE GUIA DO USUARIO MANUAL DE USUARIO V1.
Your Parrot Bluegrass Fields TM contains the following elements: 1. A Parrot Bluegrass TM prone; 2. A Parrot Skycontroller 2™ controller. You can fly your Parrot Bluegrass manually with the Parrot Skycontroller 2; 3. A Sequoia TM sensor containing: (a) A multispectral sensor, which captures the light reflected by plants; and (b) A sunshine sensor, which records the intensity of the light emanating from the sun; 4.
WARNING 1. 2. Parrot Bluegrass IS NOT A TOY. It should therefore not be used or handled by persons under the age of 18. BEFORE USING Parrot Bluegrass: (A) CAREFULLY READ this User Guide and all information and documentation available at www.parrot.com and my.parrotbusiness.
PARROT BLUEGRASS p·RESENTATION Sunshine '--t~==~sensor Power button and indicator light Threaded propeller Front camera Battery compartment Battery connector 6 - - Micro-USB port ·
i .
PARROT SKYCONTROLLER 2 PRESENTATION Position of mobile device holder Antenna USB Port Power button Take a photo Take off/Land Return to take-off point Start/stop vi eo recording 8
Front camera exposure USB Port Display mode Vertical orientation of the front camera 9
SEQUOIA PRESENTATION Sequoia consists of a multispectral sensor camera and a sunshine sensor, both integrated into Parrot Bluegrass. Sequoia was designed specifically for agriculture, based on three main demands: excellent precision, minimal size and weight, optimal ease of use.
MULTISPECTRAL SENSOR Green sensor Red-edge sensor Red sensor RGB sensor Near InfraRed sensor 4 x 1.2 megapixel monochrome sensors collect data, as pictures, in discrete spectral bands. 16 megapixel RGB photo sensor with rolling shutter. Other multispectral sensor features: • Inertial measurement unit; • 64 GB internal memory; • Magnetometer.
' fih44d 550 nm wavelength, 40 nm bandwidth Definition: 1.2 Mpx 660 nm wavelength, 40 nm bandwidth Definition: 1.
1@@,t,Q 735 nm wavelength, 10 nm bandwidth Definition: 1.2 Mpx Near lnfraRed 790 nm wavelength, 40 nm bandwidth Definition: 1.
SUNSHINE SENSOR The sunshine S€nsor is used to match each image taken by the multispectral sensor, to the light available when it was taken. This enables the comparison of images over a full flight, ,despite variations in available light during the flight. The sunshine sensor is integrated into the top part of the drone, facing the sky. ~ Parrot recommends using the SD card provided with Sequoia. Performance is not guaranteed with other SD cards. Refer to the Iist of compatible SD cards on my.
PRE-FLIGHT CHECKS REGULATIONS • • • • .Parrot Bluegrass must be used strictly in compliance with current local' regulations. The places where it is used must be suitable for manoeuvring in order to ensure the continuous safety of people, animals and property. It may not be permitted to use Parrot Bluegrass in certain public places (e.g. train stations, airports, etc.) or on public roads. The pilot must, at all times, maintain visual contact with Parrot Bluegrass and control its trajectory.
• diameter of clear space for your Parrot Bluegrass to take off and land. Check that the flight area has no ' obstacle that might interfere with flight phases or prevent visual contact. Make sure the flight altitude programmed in ParrotFields (relative to take-off point) is sufficient to avoid obstacles in the surrounding area. PARROT BLUEGRASS • • • Make sure the Parrot Bluegrass propel lers are properly mounted and secured. Make sure the Parrot Bluegrass battery is charged.
DOWNLOADING THE APP AND tSOFTWARE i. Reach my.parrot-business.com. 2. Create an account. 3. Enter the Parrot Bluegrass Fields· flyer invitation key. 4. Go to the My Products page. 5. Download the ParrotFields app and Pix4Dfields software for desktop. 6. Follow the link to activate the Pix4Dfields cloud solution. II II CHARGING TH E BATT ERY OF PARROT BLUEGRASS & The battery must be disconnected from Parrot 1. Bluegrass. Select the p lug provided for your country and insert it into the charger. 2.
The charge time is about 2 hours and 30 minutes for a flight time of about 25 minutes. INSTALLING THE BATTERY INSIDE . THE PARROT BLUEGRASS 1. Remove the battery compartment's cover from the back of the drone. 2. Slide the battery inside the compartment, keeping its wires outside and to the left. 3. Close the battery compartment's cover, leaving the wires out through the cover's aperture. Connect the black wire to the Parrot Bluegrass connector.
INSTALLING THE PROPELLERS & With the drone powered off, hold the base of the engine and screw the propellers on the Parrot Bluegrass motors. The Parrot Bluegrass uses two types of propellers: plain black ones (front left and back right, screw clockwise) and whitedotted ones (front right and back left, screw anticlockwise). Refer to figures A and B to make sure you respect the propellers' respective positions.
CONNECT YOUR TABLET TO PARROT SKYCONTROLLER 2 1. Screw the mobile device holder on the Parrot Skycontroller 2. ,1, -gYou can rotate the holder to fit your smart devices's dimensions. To do this, press on it and rotate it to the right.
2. Press the right side of the holder to fully open it. 3. Position your tablet on the holder. 4.Tighten the holder around your tablet. 5.Using your tablet's USB cable, connect your device to the Parrot Skycontroller 2's USB port. Refer to my.parrot-business.com for a comprehensive devices compatibility list.
CONNECT THE DRONE TO PARROT SKYCONTROLLER 2 1. Place Parrot Bluegrass on a flat surface. 2. Press the Parrot Bluegrass power button to turn it on. 3. Press the Parrot Skycontroller 2 power button to turn it on. 4. Wait until the Parrot Skycontroller 2 indicator light is steady green. USING THE INTERNAL MEMORY OF SEQUOIA If Sequoia detects an SD card, the shots are saved on this SD card. If no SD card is detected, Sequoia automatically saves the shots in the internal memory of the multispectral sensor.
PILOTING MODES '\ PARROT SKYCONTROLLER 2 At any time during the execution of ParrotFields flight p lan, you can reclaim control of t he d rone through t he Parrot Skycontrol ler 2. LEFT CONTROL RIGHT CONTROL ---=----= F '. .<~ j Rise Forward • -------C ~ ' .
PARROTFI ELDS ParrotFiel~!s features a one-year access to the ParrotFields mapping app that simplifies the entire in-field workflow - from the planning of automatic mapping flights, to generating real time NOVI maps, unique semi-automated scouting flights over areas of interest (including ondemand photo and video capture), and adding text annotations and photos shot with the app directly from the ground. ParrotFields complete User Guide is available at my.parrot-business.
SUNSHINE SENSOR LED LED status ISteady green ISunshine Sensor ready j Flashing yellow I SD card full I Steady red .
RETURN TO STARTING POINT To bring Parrot Bluegrass back to its starting point when it is flying with ParrotFields, press the button on Parrot Skycontroller 2. > Parrot Bluegrass returns to its starting position. & Make sure you are in a wide, open environment, free of any obstacle. LAND @) Press the button on Parrot Skycontroller 2 (or pull and hold the left stick down). > Parrot Bluegrass lands. & In order to avoid damaging Parrot Bluegrass, land on a flat and unobstructed surface.
UPDATING SEQUOIA VIA AN SD CARD 1. Insert your SD card in a computer and make sure that it contains no files in .plf format. 2. Visit the Sequoia support page: my.parrot-business.com/ 3. Download the update file available in .plf format. 4 . Copy the file to the root directory on your SD card without putting it in a folder or renaming it. 5. Insert the SD card in the sunshine sensor. 6. Turn on the drone. > The update starts automatically.
VIA THE SEQUOIA WEB INTERFACE ' Power the Parrot Bluegrass on. Connect to the drone's Wi-Fi network then enter the IP address 192.168.42.2 into the Web browser. 1. Visit the Sequoia support page: my.parrot-business.com/ 2. Download the update file available in .plf format. 3. Connect to the Sequoia Web interface. 4. Go to Settings. 5. Click on Update Sequoia. 6. An explorer window will open . 7. Select your update file and click Open. 8. A Send button appears in the Settings page. 9.
RETRIEVING PHOTOS During the flight, if no SD card is inserted, photos are stored on the internal memory of the multispectral sensor. VIA AN SD CARD 1. Insert your SD card into an adapter which is compatible with your computer. 2. Retrieve & on. the photos taken during the flight. Do not remove the SD card when the drone is turned VIA WI-Fl 1. Power the drone on, connect to the Bluegrass_XXXX Wi-Fi, and enter the 192.168.42.2 IP address in your Web browser: Sequoia automatically turns on. 2.
WARNING •, DO NOT TOUCH THE PROPELLERS ,,. \ & & - 30 Do not touch the propellers of the drone whi le the motors are functioning. Take all precautions necessary concerning property and persons. Remove the propellers from Parrot Bluegrass before connecting it to a computer.
·INDICATOR LIGHT Be.HAVIOUR PARROT SKYCONTROLLER 2 Parrot Skycontroller 2 is trying to connect to a drone. > Make sure your drone is turned on. Or Flashing red The battery of Parrot Skycontroller 2 or your drone is low. > Recharge the battery. Or Parrot Skycontroller 2 has detected a problem with the drone. > Reach the Support section at my.parrot-business.com Steady green Parrot Skycontroller 2 is connected to the drone. > You can fly the drone. (.
PARROT BLUEGRASS Flashing blue Parrot Bluegrass has detected the GPS signal and is ready to take off. Flashing green Parrot Bluegrass is in flight. Flashing yellow The update of Parrot Bluegrass is underway. Do not turn off Parrot Bluegrass Flashing red and blue Parrot Bluegrass has detected a problem with the battery. Contact your retailer or reach the Parrot Bluegrass Support section at my.parrot-business.com Flashing red - 32 Parrot Bluegrass has detected an error.
TECHNICAL SPEClFICATIONS SENSORS • Ultrasound • Altimeter • Hi-speed vertical camera INERTIAL NAVIGATION SYSTEM • Three-axis gyroscope • Three-axis accelerometer • Three-axis magnetometer AUTOPILOT • • Dual-core Arm® 9 CPU Internal flash memory for HD video from the front-facing camera: 32 GB WI-Fl AND TRANSMISSIONS • Network access point • AC Wi-Fi, 2 dual band antennas (2.
REMOVABLE BATTERY ·. • 4 cell 99 Wh battery • Battery life: 25 minutes • Rated voltage: 14.8 V • 20 A continuous discharge • • Charge at 1 C max . Operating range: 0 °C-40 °C DIMENSIONS • Weight: 1.
PARROT SKYCONTROLLER 2 CHARGER ,r · • Input: 100-240 V, S0h-60 Hz, 1.2A • Output: Max. 12.6 Vdc, 3.5 A • Operating range: 0 °C-40 °C SEQUOIA MAINTE-NANCE CLEANING THE SENSORS If dust or dirt gets on the lens and/or sensors: 1. Use the supplied microfibre cloth to clean the lens. 2. Remove any remaining traces with a cotton bud soaked in lens cleaner. OBTAINING SPARE PARTS Reach www.parrot.com or contact your distributor to find available spare parts.
GENERAL INFORMATION ,· ACCESSORIES AND SPARE PARTS Accessories and spare parts are available from your Parrot distributor or on www.parrot.com. & PRECAUTIONS FOR USE AND MAINTENANCE PARROT SKYCONTROLLER 2 Parrot Skycontroller 2 is intended to fly Parrot Bebop, Parrot Bebop 2, Parrot Disco and Parrot Bluegrass Fields, and is not suitable for children under 14 years of age. Check the list of drones which are compatible with Parrot Skycontroller 2 in the Support section on www.parrot.com.
SEQUOIA Only use accessories specified by the manufacturer. )fsand or dust gets into Sequoia it may be irreparably damaged and no longer function correctly. · Do not use Sequoia in adverse weather conditions (rain, strong winds, snow) or when visibility is poor (at night or in fog). Keep Sequoia away from high voltage power lines, buildings or any other potentially hazardous areas. Do not use this device near liquids. Do not place Sequoia on water or on a wet surface as this could cause irreparable damage.
WI-Fl Before y9u fly_your Parrot Bluegrass Fields, check the restrictions reg_arding the use of Wi-Fi frequencies in tne place where you are going to fly it. Certain frequenci~ max be restricted or prohibited. For instance, in some countries the use of the 5 GHz band for your Wi-Fi may be prohibited for outdoor locations.
of 20cm is maintained between the radiator (antenna) and user's/nearby person's body at all times. This transmitter must not be co-located or operating in conjunction with an¥ .other antenna or transmitter. PARROT SKYCONTROLLER 2 (remote control) This portable equipment with its antenna complies with FCC's radiation exposure limits set forth for an uncontrolled environment. This equipment has shown compliance with FCC's Specific Absorption Rate (SAR) limits.
proceed to an addition charge if necessary. Always check the battery's condition before charging or using it. Replace the battery if it has been dropped, or in case of odour, overheating, discolouration, deformation or leakage.'· It is recommended that you do not to use any other charger than the one provided with the product. The temperature of the battery should never exceed 60 °C (140 °F) otherwise the battery may become damaged or ignited.
I 1111 111111 MCPKG01097B I
. M5001 / M5002 Easy Intelligent Balance Charger INSTRUCTION MANUAL
INTRODUTION These operating instructions are designed to ensure that you quickly become familiar with its functions. It is therefore important that you read right through the Operating instructions, Warning and Safety Notes before you attempt to use your new charger for the first time With a built-in power supply, this charger can be powered up with 100-240V AC power socket, suitable for use with 4S Li Po battery pack, maximum 3.0A charge current and maximum SOW charge power.
INTRODUTION External port 2 1. LED 3 2. AC input port 3 . 7 pin Battery connector Adapter charging cable 7 pin ----Spin balance adapter cable NTC 4S SPECIFICATIONS e Battery type:M5002 Li Po, M5001 LiHV • Charge power:S0W • Battery cell count:4S • Dimension: 56*130*30mm e charge mode:Balance charge • Charge current: 3.
... OPERATING 1.Charge 1). Connect the charger to AC power socket; • • • • ...--------~•1rn• I 2). Connect the battery to charger; For battery W/Temp. sense [,_~atte-~ll For battery W/0 Temp.
OPERATING Attention: Please make sure to choose the right battery type before using. Connect the AC socket and power on the charger first, then connect battery. charger will make error indication and dormant for 30 minutes when power . off or connect battery before power on. 2. LED Indication LED will indicate charging status while charging 1.Charging: RED 2.Full charged: GREEN 3.
WARNING AND SAFETY NOTES These warnings and safety notes are particularly important. Please follow the instructions for maximum safety; otherwise the charger and the battery can be damaged or at worst it can cause a fire. WUIIII Rrelmnll ~ Never leave the charger unattended when it is connected to its power supply. If any malfunction is found, TERMINATE THE PROCESS AT ONCE and refer to the operation manual. If any malfunction is found, TERMINATE THE PROCESS AT ONCE and refer to the operation manual.
Warranty and Service COMPLIANCE INFORMATION FOR THE EUROPEAN UNION European Compliance Information Declaration of Conformity (€ Product(s): Item Numer(s): Battery balance charger M5001 MS002 The object of declaration described above is in conformity with the requirements of the specifications listed below, following the provisions of the European EMC Directive 2004/108/EC.
Warranty and Service Thank you for purchasing this charger, we will do our best to provide you with a comprehensive after-service and protect your rights. If you have problems with this charger, please contact local distributor immediately. We warranty this charger for a period of one year from the date of purchase. If it has a quality problem itself, all guarantee will be free. In case customers can not provide an effective certificate of purchase, we will refer the date of series number of charger.
Parrot Drones Flight Safety Guidelines* *Recommandations pour la securite des vols -Flugsicherheitsrichtlinien - Vluchtveiligheidsrichtlijnen Pautas de seguridad de vuelo- linee guida per la sicurezza del volo - Diretrizes de seguran~a de voo Wytyczne dotycz~ce bezpieczenstwa lotu - c~~~m~ - mfi1i~mwJ - tl I~ e_l-~ XI ~ 7 7 -1 }- (!) 1:c'.i:1.:. rnJ-t -'5 ff -1 F 7 -1 /' - Pedoman Keselamatan Penerbangan "'itmnru~lii1UF111lJUnuGlf1U'tltNL~u10u. - npae111na 6e3onacHoCT111 noneroe r.:,I~\ t.)l.., wl.ll..!..
ENGLISH USE OF A RECREATIONAL DRONE It is your responsibility to ensure the safety of people and other aircrafts. 1. DO NOT FLY OVER PEOPLE When using the drone, make sure you do not to endanger nearby people or vehicles. Do not fly over them and maintain a minimum safety distance. Keep well away from groups of people. 2. RESPECT THE MAXIMUM FLYING ALTITUDESS Always respect the maximum altitudes to limit the risk of a collision between your drone and other aircrafts.
8. ABOVE ACERTAIN WEIGHT, LEGAL OBLIGATIONS MAY APPLY. SEEK INFORMATION FROM THE APPROPRIATE AUTHORITIES For example, this may involve: • Registering the drone via a website of the appropriate authorities. • Fitting devices to restrict flying altitude, devices to emit an electronic/digital signal, or devices to make its presence known through lights/sounds. • Completing an online training course. • Registering the drone with the appropriate authorities. 9.
*Recommandations pour la securite des vols - Flugsicherheitsrichtlinien - Vluchtveiligheidsrichtlijnen Pautas de seguridad de vuelo- Linee guida per la sicurezza del volo - Diretrizes de seguran~a de voo Wytyczne dotycz~ce bezpieczel'istwa lotu - c~~:@J~ffi - ,lt~~~mffi - ti I ~ et~ J:1 ~ 7 7,{ 1-- O)~~{;:.MT :S jJ,{ ~- 7.,{ ✓ - Pedoman Keselamatan Penerbangan ~itmnrnori'6"1uA11J.JtJnuGlflU'i.lu-3L~u10u - npas1,111a 6e3onacHocr1,1 noneros uly,b\l ~)L.... wbl...:..
WARNING: If the battery has been damaged or in case of odor, deformation, discoloration or leakage, remove it from the drone and make sure you store it in a non-flammable container before recycling it or returning it to Parrot if requested to do so by Parrot.
Parrot BUSINESS SOLUTIONS ACTIVATE YOUR PARROT BLUEGRASS FIELDS and get a one- year subscription to both ParrotFields mobile app and Pix4Dfields software (desktop & cloud) 1/Goto my.parrot-business.