User's Manual

22
22 English
3.
If necessary, select your APN (Access Point
Name) from the suggested list. This
information is available in the documentation
provided with your 3G / 4G key. If your APN
is not in the list, you can add it by selecting
Settings > Wireless & networks > Mobile
networks settings.
4.
Among the mobile access devices, select
your 3G / 4G key.
5.
Select Access point > Other > Preset access
points.
6.
Wait for approximately 30 seconds until the
connection is established. You can also press
the button and browse the menus while
the connection is being established.
Sharing a phone 3G connection via Bluetooth
If you have a telephone that supports the DUN
(Dial-Up Networking) or PAN (Personal Area
Network) Bluetooth profiles, connecting your
telephone via Bluetooth to the Parrot ASTEROID
Tablet will allow for sharing of the telephone's 3G
connection.
Note: Refer to the compatibility page of our
website to check if your phone allows 3G
connection sharing via Bluetooth and to consult
the corresponding procedure : www.parrot.com/
uk/compatibility.
1.
Allow connection sharing on your telephone.
This procedure will vary according to your
telephone model. Refer to the compatibility
page of the Parrot ASTEROID Tablet for
more information.
2.
Connect your telephone to the Parrot
ASTEROID Tablet via Bluetooth .
3.
On the Parrot ASTEROID Tablet, select
Settings > Wireless & network settings >
Mobile Networks settings > Mobile Access
devices.
4.
Select your APN (Access Point Name) from
the suggested list, then check Select.
Sharing a phone 3G connection via USB
If you have a telephone that supports 3G
connection sharing via USB, connecting your
telephone to the Parrot ASTEROID Tablet using a
USB / micro-USB cable (not provided) will allow
for sharing of the telephone's 3G connection.
Note: Refer to the compatibility page of our
website to check if your phone allows 3G
connection sharing via USB and to consult the
corresponding procedure : www.parrot.com/uk/
compatibility.
1.
Make sure that your phone’s keypad is
unlocked, then connect the phone to the
Parrot ASTEROID Tablet using a USB cable/
micro-USB. You can also connect the phone
using the USB extension cable provided with
the Parrot ASTEROID Tablet. This
connection also enables you to recharge your
phone’s battery.
2.
If necessary, select your APN (Access Point
Name) from the suggested list, then check
the option Select. You can then modify this
setting by selecting Settings > Mobile
Networks settings > Mobile Access device.
> A pop-up window indicating that USB
connection sharing has been activated will
appear.
Note: Refer to the user guide of your phone for more
information.
Connection to a Wi-Fi network
If your smartphone can be used as a wireless
router or if a Wi-Fi® network is available next to
your vehicle:
1.
In the Parrot ASTEROID Tablet Settings
menu, tap Wireless & networks >Wi-Fi.
2.
Activate the Wi-Fi option.
3.
Tap Wi-Fi settings.
> The list of available Wi-Fi networks is
displayed.
4.
Select the Wi-Fi network.