User's Manual
ENGLISH
6
Getting started
Battery
To install the battery, lift up the magnetic cover on the left hand speaker and insert
the battery in its compartment.
Before you use it for the first time, the Parrot Zik 2 must be fully charged. To do this,
connect the Parrot Zik 2 to your computer via the USB to micro-USB cable. The but-
ton illuminates with a red light to show that the device is charging. Once charging
is complete, the button light turns white.
Note: You can also charge the Parrot Zik 2 baery using a wireless Qi charging device. To
do so, place the right speaker ear cushion onto the charger.
When the battery is flat, you can still use the Parrot Zik 2 to listen to music if your
audio player is connected to the headset via the Jack to Jack cable. Conversely, the
telephone and Bluetooth® music transfer functions, audio eects and touch sensitive
panel are not available.
Switching the Parrot Zik 2 on/o
Press the button to switch the product on/o.
You can also use the headset without switching it on by using the Jack to Jack cable
(passive mode). In that case, the telephone and Bluetooth® music transfer functions,
audio eects and touch sensitive panel are not available.
You can set a period of time after which the Parrot Zik 2 automatically switches itself
o. To do so, launch the Parrot Audio Suite 2 application and select Sengs > Auto
switch o. This option is deactivated by default.
Note: For the Parrot Zik 2 to switch o automacally, you must not be charging or using
it. Make sure that the sensor located on the right hand speaker does not touch anything.