User Instructions

SET UP YOUR B402
The B402 Kit comes with the following things:
 B402 development kit
 SoM develop board
 Starter Project
o One micro-USB cable
o One LiPo battery
1. Set up your B402
Use the online setup application to configure your new B402. The process
includes the following.
 Registration of your device with your Particle account
 Connection of your device to the Particle Device Cloud
 Particle Mesh network configuration
Once you've completed the setup you will be able to program your device and
send over-the-air (OTA) updates to it.
To begin setting up your B402, click the button below and follow the onscreen
instructions. When you've completed set up, continue to Step #2.
SET UP YOUR XENON
NOTES:
1.) If you have already set up your B402, skip to Step #2.
2.) During set up you may skip setting up a Particle Mesh network and use the
Xenon in a standalone mode.
2. Open the Web IDE
To program your B402, open a new browser tab and go to the Web IDE.
NOTE:
The Web IDE is one of the ways you can write, compile, and deploy code to your
Particle devices.