Product Info
View as looking into the M8 connector on the outside of the enclosure.
Note: Version 003 and earlier of this datasheet had a different pin numbering
for M8 connector that didn't match the connector manufacturer's numbering.
Only the numbering has changed; the function of the pin at a given location is
unchanged and the change should not affect existing designs.
1
MCU GPIO is limited to 3.3V maximum.
2
CAN Bus specifications can be found in the Tracker SoM datasheet. CAN
Bus termination is provided on the carrier board.
3
6.0 to 30 VDC at 2A when using the M8 connector. 6.0 - 90 VDC at 2A when
connecting directly to the board.
4
5V, 400 mA maximum. Controlled by the CAN_PWR GPIO.
The connector on the carrier board itself is is a JST B8B-PH-SM4-
TB(LF)(SN), 8-position, 2mm pitch, male pins, shrouded. The mating
connector is the JST PHR-8. The female sockets are available plain, with
leads, and in pre-manufactured ribbon cable formats.
PHR‐8Pin M8Pin Function Color
1 2 VIN Red
2 1 CAN_P Yellow
3 7 CAN_N Blue
4 6 CAN_5V Orange
5 5 TX_SCL_D9 Brown
6 4 TX_SDA_D8 Green