User's Manual

D3 POS User Reference
37
1. 1D barcode Scanner – D3 POS option facts
This chapter introduces the D3 POS built in with the 1D barcode Scanner program to assist
you in making the most out of your D3 POS
1.1 1DScanner(Demo program)
You can execute AT1DTScanner coded from PARTNERTECH CORPORATION to make sure
that your D3 POS scans barcodes exactly.
Figure 1. Scan Window for 1D image
1) To execute Scanner Diagnostics
Tap [start] -> [program] -> [Scanner] -> [AT1DSMScanner]
2) Reading barcodes
1. Press the L/R scanning button or Fn2, KBD key to scan barcode. You can also tap the
“ Start” on the screen to scan a barcode when the lager beam is aimed to a barcode.
2. Make sure that your D3 POS scans barcode exactly on the demo program.
* The scanned data will be displayed on the screen, if your D3 POS reads a tag exactly.
Figure 2. 1D Scanner Program