User guide
U
SER
G
UIDE
13 / 79
S
TANDARD
F
EATURES
Device Settings
Stylus
1) Start > Settings > Control Panel > Stylus.
2) In the Double-tap tab, adjust speed for double-tap by tapping/clicking in the grid.
3) In the Calibration tab, click on the Recalibrate button to calibrate stylus. Screen will
display a point, use the stylus to click on the point as accurately as possible. A total of
five points need to be clicked on for calibration.
Regional settings
1) Start > Settings > Control Panel > Regional Settings.
2) Select your locale in the pull-down list. This will change the display of certain
information as shown at the bottom of the window.
3) You can also customize settings for display of Numbers, Currency, Time, and Date. To
do this, click on the Customize button.
Backlight
1) Start > Settings > Control Panel > Backlight.
2) In the first tab (Level), you can adjust backlight setting for when device is using
battery power, or for when device is using AC adaptor power.
3) In the second tab (Backlight), you can enable/disable if you wish backlight to turn off
automatically after a certain period of time. You can configure settings for when
device is using battery power, or for when device is using AC adaptor power.