User's Manual

Partron
１２ Partron Co., Ltd .
22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea
C8723RHPS-H
between the radiator and your body.
2.6 RF exposure
considerations
(2) To end users in their
end product manuals
End Product User’s Manual:
The user manual for end users must include the
following information in a prominent location
“IMPORTANT NOTE: To comply with FCC RF
exposure compliance requirements, the antenna
used for this transmitter must not be colocated or
operating in conjunction with any other antenna or
transmitter. The equipment should be installed and
operated with a minimum distance of 20cm
between the radiator and the body.”
2.7 Antennas
See 2.4 for the list of approved antennas.
Additional information:
If the end host product is equipped with an
external connector, then a unique
(non-standard) antenna connector must be used on
the transmitter.
A list of acceptable non-standard connectors is
available upon request to Partron.
2.8 Label and compliance
information
End Product Labeling:
When the FCC ID is not visible when the module is
installed inside another device, then the outside of
the device into which the module is installed must
also display a label referring to the enclosed
module. This exterior label can be use
wording ”Contains transmitter module FCC ID:
2AD5K-C8723RHPSH” or “Contains
FCC ID: 2AD5K-C8723RHPSH”
2.9 Information on test
modes and
additional testing
requirements
If testing of the host product with this transmitter
installed and operating is necessary (to verify that
the host product meets all the applicable FCC
rules), a test mode for this specific module is