User's Manual

Dayton Audio Matrio App Description
Page | 2
Setting up Your Device in the Dayton Audio Matrio App
The Dayton Audio Matrio app offers customization to make using your DAX88 even
easier for any user. As can be seen below, there are 3 options for customization. All
custom names get stored on the DAX88 itself and retrieved by the app, so for example,
if an installer sets up the names in the app during installation, anyone who uses the app
after installation will see these names automatically. If multiple DAX88 devices are on
the network, make sure to select the desired DAX88 unit by clicking the name at the top
of the screen. The factory default name can be found on the back of the DAX88.
1) Custom Device Naming – This name will help you differentiate between units if you
have multiple on your network. For example, you might name one unit “Warehouse”
and another unit “Office”. These names will then appear instead of where you see
“DAX88_9215” in the screenshots below.
2) Custom Zone Naming – You can give the zones on your device custom names, and
these names will appear in the Zone Control and Group Control menus. For
example, if you install a DAX88 in your home, you might have names of “Living
Room”, “Dining Room”, “Kitchen”, “Bedroom”, etc.
3) Custom Input Naming – Customizing input names is useful if you have many inputs
going into your DAX88 unit. Note that input 8 is not customizable, as it will always be
“Hi-Fly”.
a. Important: If you will be using input switching across multiple DAX88 devices,
it is important to give any inputs you might have paralleled or common
between devices the same exact custom name.
i. Example: If I have two DAX88 units, and I have my CD player’s output
paralleled so it is going into Input 2 of DAX88-A and also input 2 of
DAX88-B, you must give these inputs the same name on each device
so group control works correctly for input switching.