Installation Guide

©2018 The Agency ACBH. PO Box 178, West Grove, PA 19390
www.partsmasterpro.com
1-877-542-2211
[e-mail]
58009
2. Using a wrench, remove old
stem.
3. Using a seat wrench, remove
worn seat.
4. Thread new seat into faucet
and tighten with a seat wrench.
5. Install new stem and hand
tighten.
6. Using wrench, tighten new
stem 1/4 turn. Do not
overtighten.
7. Reassemble in reverse order.
8. Turn on water supply and check
for leaks.
Installation Instructions
2. Using a wrench, remove old
stem.
3. Using a seat wrench, remove
worn seat.
4. Thread new seat into faucet
and tighten with a seat wrench.
5. Install new stem and hand
tighten.
6. Using wrench, tighten new
stem 1/4 turn. Do not
overtighten.
7. Reassemble in reverse order.
8. Turn on water supply and check
for leaks.