Manualshelf

Installation Guide

ManualsBrandsPartsmasterPro ManualsCartridges & StemsDE-7P Hot and Cold Stem for Delta Lavatory, Kitchen, Tub and Shower Faucets
1
©2018 The Agency ACBH. PO Box 178, West Grove, PA 19390
www.partsmasterpro.com
1-877-542-2211
customerservice@theonlyagencyrep.com
58044
1. Turn off water supply, and remove
handle cap, retaining screw and
handle.
2. Using wrench, remove faucet nut.
3. Remove old stem, seat and spring.
4. Replace with new stem, seat and
spring. Hand-tighten faucet nut.
5. Using wrench, tighten faucet nut.
Do not over-tighten.
6. Reassemble handle, retaining screw
and handle cap in reverse order.
Bonnet
O-Ring
O-Ring
Stem
Plate
Rubber
Seat
Spring
Installation Instructions
1. Turn off water supply, and remove
handle cap, retaining screw and
handle.
2. Using wrench, remove faucet nut.
3. Remove old stem, seat and spring.
4. Replace with new stem, seat and
spring. Hand-tighten faucet nut.
5. Using wrench, tighten faucet nut.
Do not over-tighten.
6. Reassemble handle, retaining screw
and handle cap in reverse order.
Bonnet
O-Ring
O-Ring
Stem
Plate
Rubber
Seat
Spring

Summary of content (1 pages)