Installation Guide
©2018 The Agency ACBH. PO Box 178, West Grove, PA 19390
www.partsmasterpro.com
1-877-542-2211
customerservice@theonlyagencyrep.com
58381
©2018 The Agency ACBH. PO Box 178,
West Grove, PA 19390. All Rights Reserved.
The Agency ACBH assumes no responsibility
for failure due to improper use. PartsmasterPro
is a registered trademark of The Agency ACBH
www.partsmasterpro.com
Made in Taiwan
WARNING: Cancer - www.P65warnings.ca.gov
1. Turn off water supply.
2. Remove the handle, cap,
cam, packing
and ball assembly.
3. Remove the old spray diverter by
inserting a flat head screw driver to
pop out the diverter.
4. Insert new spray diverter.
5. Reassemble in reverse order.
6. Turn on water supply and check for leaks.
Installation Instructions