Installation Guide

www.partsmasterpro.com

1-877-542-2211

customerservice@theonlyagencyrep.com

58563

The Agency ACBH assumes no responsibility

for failure due to improper use. PartsmasterPro

is a registered trademark of The Agency ACBH

www.partsmasterpro.com

Made in Taiwan

WARNING:

Reproductive Harm - www.P65warnings.ca.gov

1. Turn off water supply.

2. Remove handle and cap assembly.

3. Remove ball and cam by pulling up on ball stem.

4. Remove existing seats and springs.

5. Install new springs and seats.

6. Reassemble faucet in reverse order. Make sure

that lug on side of cam is inserted into slot on the

side of the faucet body.

7. Turn on water and check for leaks.

Installation Instructions

PAGE 1
-877-542-2211 customerservice@theonlyagencyrep.com 58563 Installation Instructions 1. 2. 3. 4. 5. 6. Turn off water supply. Remove handle and cap assembly. Remove ball and cam by pulling up on ball stem. Remove existing seats and springs. Install new springs and seats. Reassemble faucet in reverse order. Make sure that lug on side of cam is inserted into slot on the side of the faucet body. 7. Turn on water and check for leaks. WARNING: Reproductive Harm - www.P65warnings.ca.gov ©2018 The Agency ACBH.