User's Manual

Complete Rotational System 012-05293F
Please—Feel free to duplicate this manual
subject to the copyright restrictions below.
Copyright, Warranty and Equipment Return
Copyright Notice
The PASCO scientific Model ME-8950A Complete
Rotational System manual is copyrighted and all rights
reserved. However, permission is granted to non-profit
educational institutions for reproduction of any part of
this manual providing the reproductions are used only
for their laboratories and are not sold for profit. Repro-
duction under any other circumstances, without the writ-
ten consent of PASCO scientific, is prohibited.
Limited Warranty
PASCO scientific warrants this product to be free from
defects in materials and workmanship for a period of one
year from the date of shipment to the customer. PASCO
will repair or replace, at its option, any part of the product
which is deemed to be defective in material or workman-
ship. This warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made
solely by PASCO scientific. Responsibility for the return
of equipment for warranty repair belongs to the cus-
tomer. Equipment must be properly packed to prevent
damage and shipped postage or freight prepaid. (Damage
caused by improper packing of the equipment for return
shipment will not be covered by the warranty.) Shipping
costs for returning the equipment, after repair, will be
paid by PASCO scientific.
Equipment Return
Should this product have to be returned to PASCO sci-
entific, for whatever reason, notify PASCO scientific by
letter or phone BEFORE returning the product. Upon
notification, the return authorization and shipping
instructions will be promptly issued.
NOTE: NO EQUIPMENT WILL BE
ACCEPTED FOR RETURN WITHOUT AN
AUTHORIZATION.
When returning equipment for repair, the units must be
packed properly. Carriers will not accept responsibility
for damage caused by improper packing. To be certain
the unit will not be damaged in shipment, observe the
following rules:
1. The carton must be strong enough for the item
shipped.
2. Make certain there is at least two inches of packing
material between any point on the apparatus and the
inside walls of the carton.
3. Make certain that the packing material can not shift
in the box, or become compressed, thus letting the
instrument come in contact with the edge of the box.
Address:PASCO scientific
10101 Foothills Blvd.
P.O. Box 619011
Roseville, CA 95678-9011
Phone: [phone]
FAX: [phone]
email: [e-mail]
web: www.pasco.com
ii
Credits
This manual authored by: Ann and Jon Hanks
This manual edited by: Ann and Jon Hanks