Brochure

Shower Pan Liner
Shower Pan Liner-3
3/25/18
Vinyl Shower Pan Cement
DIRECTIONS FOR USAGE:
1. Surfaces to be joined must be clean and dry.
2. Apply cement with dauber or short natural bristle brush. If
cement appears jellied, it may be thinned by adding a small
amount of acetone.
3. To join sheets allow a 4” minimum overlap. Apply a thin
even coat of cement to both surfaces to be joined. The
entire surface of material to be joined must be covered with
cement. Apply the cement to short lengths of material, not
to exceed 3’ at a time.
4. Join cemented surfaces as quickly as possible before
cement dries. For seams exceeding 6’ in length, use
a weighted, smooth flooring roller to facilitate bonding
material.
5. Apply a wide bead of cement to the entire length of the
overlap. If material has been joined outside of installation
area, apply the bead to both top and bottom edges of the
overlap.
6. Do not disturb or try to peel joined surfaces. The
cemented seam should fully cure in 24 hours.
NOTE: COMMON PVC PIPE CEMENT WILL NOT
SOLVENT WELD VINYL SHOWER PAN LINER
Shower Pan Caulk
Plastic Shower Drain
Clamping Ring Style for Ceramic Tile Showers
Excellent for sealing
between shower pan liner
and shower drains
Can be used anywhere
an economical, weather
resistant, long life sealant
is required
4” diameter strainer
2” IPS plastic tailpiece allows adjustments
to desired level
Fits over 2” or inside 3” Schedule 40 DWV
Pint size only
PART
NUMBER
MATERIAL
DRAIN
CONNECTION
TOP
FLANGE
DIAMETER
BOTTOM
FLANGE
DIAMETER
8015 PVC 2”-3” PVC
5-1/4” 6-1/2”
8016 ABS 2”-3” ABS
8019 4” STAINLESS STEEL STRAINER
PART
NUMBER
SIZE
1709 10 oz Cartridge
PART
NUMBER
3008
• Add suffix BN for Brush Nickel