Brochure

Hose Clamps & Fittings
J-12
Lynwood, CA [phone]
Curtis Bay, MD [phone]
PASCOSPECIALTY.COM
3/25/18
40 Series
48 Series
62 Series
60 Series
61-C Series
64 Series
Brass Flare & Compression Fittings
PART
NUMBER
SIZE
7-404 1/4”
PART
NUMBER
SIZE
7-4844 1/4”
7-4868 3/8” x 1/2”
7-4888 1/2” x 1/2”
PART
NUMBER
SIZE
7-61C4 1/4”
7-61C6 3/8”
*7-614 1/4”
*7-616 3/8”
PART
NUMBER
SIZE
7-604 1/4”
7-606 3/8”
7-6010 5/8”
PART
NUMBER
SIZE
7-644 1/4”
7-646 3/8”
7-6410 5/8”
PART
NUMBER
SIZE
7-624 1/4”
7-626 3/8”
7-6264 3/8” x 1/4”
7-628 1/2”
7-6286 1/2” X 3/8”
7-6210 5/8”
7-6214 7/8”
7-62106 5/8” X 3/8”
Two piece: body and nut.
Straights and shapes are manufactured from CA360, CA345, CA377 brass. 45° flare. Heavy duty flare fittings are
manufactured to SAE specifications. Compatible with copper, brass, aluminum and steel hydraulic tubing that can be
flared. Used on low, medium and high pressure lines under the most adverse conditions. Fair vibration resistance,
The long nut offers greater support. Temperature range from -65° to +250° F.
Three piece unit: body, nut and sleeve.
Straights and shapes are manufactured from CA360, CA345, CA377. Compatible with copper, brass, aluminum and
thermoplastic tubing. (Thermoplastic tubing requires the use of a brass insert for support.) Low pressure air, oil,
water and gas up to a maximum pressure of 400 psi. Fair vibration resistance. The long nut can be used for greater
vibration application.
Compression Union
Flare x MIP Coupling
Flare Nut Caps
Compression Tees
Compression Cap/Short Compression Nut
Brass Compression
Sleeve
AB 1953
Compliant
*Short Nut