MSDS

ManualsBrandsPaslode ManualsTools & Hardware16 oz. Pneumatic Nail Gun Oil

Page 1 of 7

MATERIAL SAFETY DATA SHEET

SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION

PRODUCT IDENTIFICATION Paslode®/Duo-Fast® Lubricating Oil for Pneumatic Tools

Part Number 403720

DISTRIBUTOR IDENTIFICATION

Company Name Paslode

Address 888 Forest Edge Drive

Vernon Hills, Illinois 60061-3105

Telephone 847-634-1900

Emergency Contact CHEMTREC

Emergency Telephone 800-424-9300

MSDS PRINT DATE 09/11/2009

* EMERGENCY OVERVIEW

This product is a liquid that is insoluble in water.

Direct eye contact may cause minor, short term irritation. Short term skin

exposure is not expected to be irritating. Inhalation and ingestion are not

anticipated routes of exposure during normal conditions of use.

* HMIS Rating: Health- 1 Flammability- 1 Reactivity- 0 PPE- X

SECTION 2 – COMPONENT DATA

Components listed in this section may contribute to the potential hazards associated

with exposure to the concentrate. The product may contain additional non-hazardous

or trade-secret components.

Mineral Oil Cas#: proprietary Percent: > 90

Exposure Limit:

ACGIH TLV: 5 mg/m3 (as mist)

ACGIH STEL: 10 mg/m3 (as mist)

OSHA PEL: 5 mg/m3 (as mist)

- Carcinogenic Components: This product contains no carcinogens.

SECTION 3 – HAZARDS IDENTIFICATION

POTENTIAL HEALTH EFFECTS and SYMPTOMS from SHORT TERM/ACUTE EXPOSURE:

- EYE EXPOSURE –

This product is not expected to cause eye irritation under normal conditions of

use. Symptoms of slight eye irritation may result when direct contact occurs, or

when exposed to high mist levels in poorly ventilated areas.

- SKIN EXPOSURE –

Short term skin contact is not expected to cause skin irritation.

Prolonged or repeated direct exposure to the skin may result in symptoms of

irritation and redness. In severe cases, prolonged or repeated contact may result

in dermatitis accompanied by symptoms of irritation, itching, dryness, cracking

and/or inflammation.

Summary of content (7 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION PRODUCT IDENTIFICATION Paslode®/Duo-Fast® Lubricating Oil for Pneumatic Tools Part Number 403720 DISTRIBUTOR IDENTIFICATION Company Name Address Telephone Emergency Contact Emergency Telephone MSDS PRINT DATE Paslode 888 Forest Edge Drive Vernon Hills, Illinois 847-634-1900 CHEMTREC 800-424-9300 60061-3105 09/11/2009 * EMERGENCY OVERVIEW This product is a liquid that is insoluble in water.
PAGE 2
Product: Paslode®/Duo-Fast® Lubricating Oil for Pneumatic Tools P/N 403720 - INHALATION – This product has low volatility and so is not expected to cause respiratory tract irritation during normal conditions of use. Exposure to high mist levels in poorly ventilated areas may cause upper respiratory tract irritation and difficulty breathing. - INGESTION – Ingestion may cause slight stomach irritation and discomfort. POTENTIAL CHRONIC HEALTH EFFECTS: No further data known.
PAGE 3
Product: Paslode®/Duo-Fast® Lubricating Oil for Pneumatic Tools P/N 403720 EXTINGUISHING MEDIA: In accordance with NFPA guidance, dry chemical, foam, or CO2 fire extinguishers are all acceptable. Note that while water fog extinguishers are also acceptable, do NOT apply a direct stream of water onto burning product because it may cause spreading and increase fire intensity. UNUSUAL FIRE & EXPLOSION HAZARDS: No further data known.
PAGE 4
Product: Paslode®/Duo-Fast® Lubricating Oil for Pneumatic Tools P/N 403720 SECTION 8 – EXPOSURE CONTROLS, PERSONAL PROTECTION PERSONAL PROTECTIVE EQUIPMENT: Selection of personal protective equipment should be based upon the anticipated exposure and made in accordance with OSHA’s Personal Protective Equipment Standard found in 29 CFR 1910 Subpart I. The following information may be used to assist in PPE selection. - EYE PROTECTION – Wear eye protection appropriate to prevent eye exposure.
PAGE 5
Product: Paslode®/Duo-Fast® Lubricating Oil for Pneumatic Tools P/N 403720 DECOMPOSITION PRODUCTS MAY INCLUDE: Thermal decomposition products are dependent on combustion conditions. A complex mixture of airborne solid, liquid, particulates and gasses may evolve when the material burns. Combustion byproducts may include: oxides of sulfur, oxides of carbon, incompletely burned hydrocarbons as fumes and smoke. CONDITIONS TO AVOID: Avoid contact with incompatible materials and exposure to extreme temperatures.
PAGE 6
Product: Paslode®/Duo-Fast® Lubricating Oil for Pneumatic Tools P/N 403720 SECTION 14 – TRANSPORT INFORMATION DOT HAZARDOUS MATERIAL INFORMATION: * Not otherwise DOT regulated. SECTION 15 – REGULATORY INFORMATION FEDERAL REGULATIONS: SARA 313: This product contains NONE of the substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
PAGE 7
Product: Paslode®/Duo-Fast® Lubricating Oil for Pneumatic Tools P/N 403720 SECTION 16 – OTHER INFORMATION Prepared by: Date of issue: Last revision date: Regulatory Compliance Department 9/11/09 9/11/09 The information contained in this material safety data sheet is provided without warranty, expressed or implied, except that it is accurate to the best knowledge of Paslode. The data on this sheet relate only to the Lubricating Oil for Pneumatic Tools.