SDS

Page 3 of 7
Section 5 Fire Fighting Measures
Suitable Extinguishing Media: Water spray, foam, carbon dioxide or dry chemical.
Unsuitable Extinguishing Media: Do not use water jet as an extinguisher as this will spread fire.
Specific Hazards: Extremely flammable aerosol. Contains gas under pressure;
may explode if heated.
Thermal decomposition (combustion) may produce carbon
monoxide and carbon dioxide.
Special Protective Equipment
& Precautions for Fire-fighters: Avoid contact or inhalation with material or combustion
products. Use self-contained breathing apparatus in confined
spaces. Eliminate all sources of ignition. Cool containers
with water from unmanned hose holder at maximum distance.
Isolate hazard area and deny entry to unauthorized persons.
Section 6 Accidental Release Measures
Personal Precautions, Protective
Equipment & Emergency Procedures: Eliminate all sources of ignition and isolate hazard area.
Ventilate area to maximum extent possible. Wear
appropriate chemical resistant clothing and eye protection.
See Sections 5, 7, 8, and 11 of this Safety Data Sheet for
additional information.
Methods & Materials for Containment
& Cleanup: Contain fire-fighting water to maximum extent possible and
do not flush fire-fighting water to surface water or sanitary
sewer system. Place waste material in appropriate container
and dispose of per Section 13 of this Safety Data Sheet.
Section 7 Handling and Storage
Precautions for Safe Handling: Extremely flammable aerosol: Do not handle or use near
extreme heat, sparks, open flames or hot surfaces.
Pressurized container: Do not pierce or burn, even after use.
Avoid breathing fume/gas/mist/vapors/spray. Wear
appropriate personal protective equipment. Use only
outdoors or in a well-ventilated area. For maximum number
of tool cycles, use before date code on fuel cell.
Conditions for Safe Storage, including
Incompatibilities: Do not expose to temperatures exceeding 50ºC/122ºF. Store
in a cool, dry place out of direct sunlight. Store in a well-
ventilated area. See Section 10 of this Safety Data Sheet for
incompatible materials.