Use and Care Manual
2
INTRODUCTION
The PASLODE
®
F-350P
framing nailer is a quality-built tool designed for use in residential
framing applications. This tool will deliver efficient, dependable performance when used
according to the manufactures guidelines. Please study this manual including the safety
instructions to fully understand the operation of this tool.
TOOL AND FASTENER SPECIFICATIONS ................................................................. 3
SAFETY INSTRUCTIONS ........................................................................................... 4
TOOL INSTALLATION AND OPERATION ................................................................ 5-6
AIR SYSTEMS ............................................................................................................. 7-8
FEATURES AND BENEFITS .......................................................................................... 9
EXPLODED VIEW AND SPARE PARTS LIST ....................................................... 10-11
MAINTENANCE ....................................................................................................... 12-13
TROUBLESHOOTING .................................................................................................. 14
WARRANTY .................................................................................................................. 15
ACCESSORIES ........................................................................................................... 16
3
TOOL SPECIFICATIONS
MODEL NO. F-350P (Part# 515000)
HEIGHT
13.5”
WIDTH
5.5"
LENGTH
20.5"
WEIGHT 7 lbs. 13 oz.
OPERATING PRESSURE 80 to 120 p.s.i. (5.5 to 8.3 bars)
FASTENER SPECIFICATIONS
TOOL AIR FITTINGS
:
This tool uses a 3/8” N.P.T. male plug. The fitting must be capable of discharging tool air
pressure when disconnected from the air supply.
OPERATING AIR PRESSURE:
80 to120 p.s.i. (5.5 to 8.3 bars). Select the operating air pressure within this range
for best tool performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
NAIL LENGTH
2" - 3¼"
SHANK DIAMETER .113 - .131
TOOL AND FASTENER SPECIFICATIONS