Instructions / Assembly

17
Air Filter
Open the cover by pressing slightly above the adapter and
pivoting the cover open. The air filter simply lifts out.
Tap the filter GENTLY to remove any dust. Check and clean
the air filter every two days. Soap and water restores the
filter to a "like new" condition.
End-of-Workday Routine
These simple steps are based on maintaining the safety and
operational efficiency of the Cordless Finish Nailer.
Before you leave the work site:
1. Remove battery and store in tool case. Always use the
Cordless Finish Nailer case for transporting and storing
the tool.
2. Dispose of all empty fuel cells. Remember to dispose of
these cells where they will not be crushed, punctured,
burned or found by children.
When you get home:
1. Place the battery in its charger if it needs charging as
indicated by the red charge light on the handle.
2. Wipe your Cordless Finish Nailer with a clean, soft
cloth.
3. Remove and clean the filter every two days.
4. Check work contacting element to ensure it is operating
freely.
Paslode Cordless Tool Accessories
A variety of accessories are available for the Paslode
Cordless 16 Gauge Straight Finish Nailer.
No-Mar Tip -3 Pk. Part No. 219236
Battery - Part No. 404717
Degreaser Cleaner - Part No. 219086
9/64" Hex Key - Part No. 900736
Tinted Safety Glasses - Part No. 402512
Clear Safety Glasses - Part No. 402510
Bumper Removal Tool - Part No. 900760
Paslode Cordless Lubricating Oil - Part No. 401482
Battery Charger Kit - Part No. 900200
Automotive Adapter - Part No. 900507
Paslode Cordless Finish Nailer Carrying Case - Part
No. 900751
High Altitude Valve Kit - Part No. 219247
Contact your Paslode
®
representative for additional
information.
Tools
A 9/64" Hex Wrench (Part No. 900736) is provided with
each Cordless 16 Gauge Straight Finish Nailer .
COVER
FILTER
CAP
(For fuel cells at altitudes from 4,000 to 9,000 feet)
Servicing