Instructions / Assembly

4
Description
The Paslode Cordless 16 ga. Straight Finish Nailer is a self-
contained, fully portable nailer that uses liquid hydrocarbon
fuel to power a unique linear drive internal combustion
motor.
In order for you to fully understand the information contained
in this manual, you need a basic understanding of the
Cordless Finish Nailer . As you can see in the illustration
below, the Cordless Finish Nailer is made up of three major
areas: handle, motor, and magazine.
As you examine the Cordless 16 ga. Straight Finish Nailer,
become familiar with the three major assemblies and the
various components located in each of them.
The Handle Assembly contains the fuel cell, indicator
light, and the trigger.
The Motor Assembly contains the cover and filter, the
motor housing, the nose, and the work contacting element.
The Magazine Assembly contains the components to load
and control the fastener and the battery for the Cordless
Finish Nailer.
Specifications
Dimensions: Weight-with battery 4 lbs 12oz.
Height 11-3/4 inches
Length 10-1/2 inches
Magazine 16 ga. Straight
Cycle Rate: Intermittent Operation – 2 to 3 nails
per second
NOTE: Exceeding these cycle rates could cause the tool to
overheat, resulting in loss of performance or damage to tool
components.
By using the Paslode Cordless 16 ga. Straight Finish Nailer
at its recommended cycle rate, you will be able to drive
several thousand nails in a typical workday.
Fasteners: 16 Gauge Straight
Magazine Capacity: 2 nail strips, or 110 fasteners
Battery : 6 volts DC - Provides enough energy to
drive approximately 4000 fasteners on a full
charge.
Fuel Cell: Short yellow fuel cell (.64oz)-part no. 650039
Liquid hydrocarbon - Provides enough fuel
to drive approximately 1200 fasteners.
reversable
belt hook
Magazine Assembly
fuel cell compartment
cap
removable
cover & filter
no-mar tip
Handle Assembly
(soft grip)
soft
touch
trigger
Motor Assembly
battery compartment
(opposite side)
battery indicator light
(opposite side)
follower
motor housing
nail count indicator
adjustable
depth of drive
(opposite side)
quick clear
cover
work contact
element
nose
Overview of the Paslode Cordless 16 ga. Straight Finish Nailer