Operators Manual

[e-mail]
www.itwcp.co.uk
Technical Helpline UK: 0800 731 4924
Technical Helpline ROI: 1 800 882 388
16
Servicing
Clearing a Jam (continued)
Make certain magazine mounting screws are tight and
magazine is tight to nose. Attempting to fire tool with a loose
magazine will result in loss of staple control, damage to tool,
or staple discharge toward operator.
Air Filter
Open the cover by pressing slightly above the yellow
adapter, and pivoting the cover open. The air filter simply
lifts out.
Tap the filter GENTLY to remove any dust. Check and clean
the air filter every two days. Soap and water restores the
filter to a "like new" condition.
End-of-Workday Routine
At the end of each workday, conduct an end-of-workday
routine. These simple steps are based on maintaining the
safety and operational efficiency of the Cordless Stapler.
Before you leave the work site:
1. Remove battery and store in tool case. Always use the
Cordless Stapler case for transporting and storing the
tool.
2. Dispose of all empty fuel cells. Remember to dispose of
these cells where they will not be found by children,
crushed, punctured, or burned.
When you get home:
1. Place the battery in its charger if it needs charging as
indicated by the red charge light on the handle.
2. Wipe your Cordless Stapler with a clean, soft cloth.
3. Remove and clean the filter every two days.
4. Check work contacting element to ensure it is operating
freely.
Impulse
®
Cordless Accessories
A variety of accessories are available for the Impulse
Stapler:
Battery - Part No. 402500
Extra battery allows use of one battery while spare battery
is being charged.
Tinted Safety Glasses - Part No. 402512
Cuts glare while affording eye protection.
Clear Safety Glasses - Part No. 402510
Impulse
®
Oil - Part No. 401482
Battery Charger Kit - Part No. 900200
Cordless Stapler Case - Part No. 900362
Contact your Paslode
®
representative for additional
information.
Impulse
®
Tools
A 5/32 Hex Socket Wrench (Part No. 401331 ) is provided
with each Impulse Stapler.
IM200 S16 Operator Manual
17/20