Manual

ombustion
(C_mara de
combustion)
Tool
Sleeve
Cutaway
Piston
Illustration
"Mid-Check"Area
(Escape)
Motor Assembly
Conjunto del Motor
_k DANGER
Do not attemptto operate the tool unlessthe cap
assembly is securely attached to the housing.
Operatingthe PaslodeCordless tool witha loose
or missingcap assemblycan resultinthe escape
of burninggases, tool damage, and injuryto tool
userand property,
_ PELIGRO
NOTE
After the tool is completely reassembled and all
screws are tightened, test the tool for proper
operation. Some smoke may be noticeable from
the exhaust ports on the first few cycles as excess
oil is burned off, Consult the operating manual for
instructions if the tool malfunctions.
No trate de usar la herramienta a menos que el
conjunto de la tapa est6 sujeto firmemente al
bastidor. Si usa la herramientaPaslodeCordless
cuandoe!conjuntodelatapa est_suelto,ocuando
no Io tenga instalado, los gases de combustibn
pueden escapar, la herramientase puede da_ar,
puede cuasar da_os a la propiedady lesionesa
quien lause.
NOTA
Despu6s de que hayavueltoa armar completamente
la herramientay de de que hayaapretado todos los
tornillos,compruebesi la herramientafunciona
correctamente. Es posibleque vea salir algo de
humode lospuertosde escape durantelosprimeros
ciclos,mientrasse quema el exceso de aceite.
Revise el Manual de Funcionamientopara consultar
las intruccionesde averias en la herramienta.
10