Manual

TrimMaster 18" Finish Nailer Operation
Operation:
7
/
/
/
•PRESS WORK -
CONTACTING
ELEMENT
AGAINST THE
WORK SURFACE.
Fan motor starts,
fuel is injected into
combustion
chamber and
mixed with air by
the fan.
--SQUEEZE
TRIGGER
Spark plug ignites
the fuel/air mixture
driving the piston
assembly down on
the fastener.
/ RELEASE
TRIGGER -
LIFT TOOL
Combustion
chamber opens.
Fan exhausts hot
gases and cools
internal
components.
adjustment
wheel in
either
direction
Depth of Drive Adjustment
Remove the battery before adjusting the depth of
drive.
The depth of drive adjustment is done by turning the
adjustment wheel as shown by the arrows on the side of the
tool.
,_ DANGER
The work contactingelement and nosewillbecome hot
afterprolongedorrapiduse. Ifitbecomesnecessaryto
adjustthe workcontactingelement, avoidtouchingwith
bare hands.
A CAUTION
This tool must be operated in a well ventilated
environment, because the tool exhausts carbon
monoxide similar to a chainsaw or lawn mower.
Exposure to carbon monoxide may cause dizziness,
nausea or unconsciousness.
NOTE: Altitude Restriction
Impulse_ technology is powered by an internal
combustionengine and are effected by altitude.
The tool may lose power or not cycle consistently
at elevations of 4000 feet or greater. When using
the tool at elevations of 4000 feet it is
recommended to use the blue high altitude fuel
metering valve part #219247.
13