Manual

Servicing
Air Filter
Open thecover by pressingslightlyabovethe adapter and
pivoting the cover open. The air filter simply lifts out.
Tap the filter GENTLY to remove any dust. Check and clean
the air filter every two days. Soap and water restores the
filter to a "like new" condition.
COVER
FILTER
CAP
End.of.Workday Routine
These simplestepsare based on maintainingthe safetyand
operationalefficiencyofthe Impulse®18 Ga. Brad Nailer.
Beforeyou leave the work site:
1. Removebatteryand storeintool case.Always usethe
TdmMaster 18_'FinishNailer casefor transportingand
storingthe tool.
2. Disposeofallemptyfuel cells.Remembertodisposeof
these cellswhere theywill not be crushed, punctured,
burnedor found by children.
When you get home:
1. Placethe batteryinitscharger ifit needs chargingas
indicatedby the red charge lighton the handle.
2. Wipe yourTrimMaster 18" FinishNailer witha clean,
softcloth.
3. Remove and cleanthe filterevery two days.
4. Checkworkcontacfingelementtoensureit isoperating
freely.
Paslode Cordless Tool Accessories
A varietyof accessoriesare available for the Impulse®18
Ga. Brad Nailer:
No-Mar Replacement Tip -Hard Tip Part No. 901048
No-Mar Replacement Tip -Soft Tip Part No. 901067
Battery - Part No. 404717
Extrabatteryallowsuse ofone batterywhilesparebattery
isbeing charged,
Tinted Safety Glasses - Part No, 402512:
Cuts glare whileaffordingeye protection.
Clear Safety Glasses - Part No. 402510
Impulse®Oil - Part No. 401482
Battery Charger Kit - Part No. 900200
Automotive Adapter - Part No. 900507
TrimMaster 18" Finish Nailer Case - Part No, 901058
High Altitude Valve Kit - Part No. 219247
Contact your Paslode ® representative for additional
information.
Tools
A 9/64 Hex Wrench (Part No. 900736) is provided with
each TdmMaster 18" Finish Nailer.
16