Manual

Troubleshooting
Preparing Tool for Operation. Battery/Charger Problems
SERVICE
SYMPTOM
Batterydoes not appear to accept charge
when battery isplugged into the charger.
POSSIBLE PROBLEMS
Inoperative indicator lightson charger, or
defective charger.
Try battery intool after a full charge cycle.
If toolsindicator lightis red, charger not
working properly. Replace charger, or
monitorchargJngtime to ensure battery has
adequate hme for recharging. It is normal
for battery to feel warm after propedy
charging.
Battery damaged or cycle life exhausted. Replace battery.
Charger gets hot, makes excessively loud Damaged charger. Discontinue use immediately and unplug
noise, or smokes dudng charging cycle, from power source. Replace charger and
Charger cord or wall pluggets hot. tag or dispose of charger to prevent
accidental re-use or connectionto power
SOUrCe.
Normal Stage of Operation
SYMPTOM POSSIBLE PROBLEMS
Fan does notrun - tool indicator light is Battery isnotcharged.
blinkingred or solid red,
Fan does notrun, or runsslower than
normal - tool indicatorlight is solid red.
Work-contacting element does not depress
fully - tool does not operate.
Tool willnot cycle - fan runs, indicatorlight
is solidgreen.
Batteryterminals are oily, dirty, or corroded.
Batteryis discharged.
Work-contacting element is bent, or build-upof
debris intrack restrictsoperation.
Lockoutfeature is engaged.
SERVICE
Charge battery.
Clean battery terminalswith soft cloth.
Charge battery.
Remove and inspect lower probe. Clean the
track. Repair or replace lower probe as
required.
Add stripof nails.
Fue_Cellempty. Replace fuel cell.
Spark wire out of spark plug.
Spark plug is dirty.
No spark is generated.
Remove cap and check spark lead, insert in
spark plug and replace cover.
Clean tool cylinder head.
Return tool to authorized Paslode_ dealer for
service.
17