Speaker User Manual

SR2 Owners Manual Rev 0.2

rooms which are otherwise lacking in high frequency and down or

counter-clockwise for rooms which tend to sound too bright.

If the listening room allows the listener to be directly on axis with

the drivers and the room is neutral in character then the most likely

setting of this control will be either the mid position or perhaps the

clockwise or lower position. Rooms that require the listener to sit

off axis to the speakers and rooms that have a surfeit of absorptive

surfaces frequently require this control be in the up or

counterclockwise position. Rooms that sound bright and those with

a multitude of hard reflective surfaces typically require this control

be set in the down or clockwise position.

The suggested settings are just that… and nothing more. There is

no substitute for listening and personal judgment. We encourage

users of this product to experiment with level settings and fine

movements of speaker position until the most accurate or pleasant

combination of spectral balance and soundstage are achieved.

Specifications

Passive 3-way design, bi-amp enabled

Impedance: 6 ohms

Sensitivity: 86 dB / watt / meter

Floor space required: 16-1/2 inches wide x 24 inches deep

Overall height: 43 inches

Shipping weight 165 lbs each

And ETC.

We thank you for your confidence, and hope that you enjoy it for

many years.