Environmental Product Declaration

PEP ecopassport No LGRP-00299-V01.01-EN
Page 5 / 5
Legrand North America
Pass & Seymour
50 Boyd Ave
Syracuse, NY 13209
1.877.BY.LEGRAND (295.3472)
www.legrand.us
Product Environmental Pro le
Pass & Seymour - Ground Fault Circuit Interrupter
Duplex Receptacle
For products other than the Reference Product, the environmental impacts can be determined via extrapolating from the reference product impacts,
based on the rules listed below. The impacts of the products listed below can reasonably be determined for a given impact category and life cycle
phase by multiplying the corresponding impact value above for the FSP-211 product by the conversion factor provided below. Factors are generally
consistent within a lifecycle phase for each product.
Each factor is calculated as listed below and then the factors can be applied to the impacts from each of the lifecycle phases as noted in the table
below, where each row represents a multiple product series.
Factor Ratio to calculate factor
A Wattage of product energy use / Wattage of reference product energy use
B Mass of product without packaging / Mass of reference product without packaging
C Mass of product packaging / Mass of reference product packaging
D Total mass of product with packaging / Total mass of reference product with packaging
Factor by life cycle phase
Part Number Manufacturing Distribution Installation Use End of Life
15A versions of all
products lised under
product concerned
BDCAB
20A versions of all
products lised under
product concerned
B D C 1.14 * A B
ENVIRONMENTAL IMPACTS continued
Registration number: LGRP-00299-V01.01-EN Drafting rules: PCR-ed3-EN-2015 04 02
Supplemented by: PSR-0005-ed2-EN-2016 03 29
Veri er’s accreditation number: VH08
Information and reference documents: www.pep-ecopassport.org
Date of issue: 10-2016
Validity period: 5 years
Independent veri cation of the declaration and data, in compliance with ISO 14025:2010
Internal External
The PCR Review was conducted by a panel of experts chaired by Philippe Osset (SOLINNEN).
The elements of the present PEP cannot be compared with elements from another program.
Documents in compliance with ISO 14025:2010: “Environmental labels and declarations - Type III
environmental declarations”
In compliance with ISO 14040:2006: “Environmental management – LCA – Principles and framework”
In compliance with ISO 14044:2006: “Environmental management – LCA – Requirements and guidelines”
In alignment with EN 15804:2012+A1:2013: “Sustainability of construction works - EPD’s - Core rules for the
product category of construction products”